EDgun
EDgun | Leshiy 2 | Speed Loader
$194.99
The EDgun Leshiy 2 Speed Loader is a step forward in the evolution of speed loaders; unlike previous homemade versions, this model is CNC machined aluminum and hard anodized. The unit is then finished in PFTE, ensuring smooth operation while loading and locking the individual sections. With other 3D-printed models, the speedloaders required the user to remember what bay (cylinder) is loaded. It was common to double load a port while dropping the projectiles in the hole. On the EDgun Speed Loader, the pellets are held at the top for easy visualization. Once all eight ports are filled, a lever drops all the bullets at once. This unique process adds ease and speed to preloading the Speed Loader.
Hard-Anodized
PFTE Finish
All Aluminum Construction
Unique Loading Feature
Built-in Magnet
6 Magazine Capacity
Caliber Marking
EDgun Quality
FX Airguns
FX Magazines | DRS Mini
$49.99
.22 CAL PRE-ORDER!! SHIPPING 11/12/24
This mini magazine allows for easier mounting of scopes to any of the DRS models. The removable cover allows for easy reloading. Available in the following calibers:
4.5mm / .177 – 16 rounds
5.5 mm / .22 – 14 rounds
6.35 mm / .25 – 12 rounds
FX Airguns
FX | Carbon Fiber Bottle w/ Valve | 300 BAR
from $329.99
New FX Carbon Fiber Bottle now with a max fill pressure of 300 bar!
Compatible with FX Crown, Maverick, and Impact PCP Air Rifles
Compatible with some Dreamline models*
Includes valve
*Bottle adapter required for Deamline models*
EDgun
EDgun | Leshiy 2 Air tank | 350CC / 300 bar carbon fiber
$299.99
EDgun Leshiy 2 Air tank - 350CC / 300 bar carbon fiber
In order to extend your shooting between refills, a bigger bottle is always the first thing you should consider. This 350CC carbon fiber bottle allows you to enjoy longer your sustained shooting with the Leshiy 2. 190mm long and 65mm in diameter, the bottle is not as large as to bother the shooter as well, keeping your whole kit backpack friendly!
Perfect design for Leshiy 2. With this 350cc bottle, the Leshiy 2 gains 260cc of additional air volume.
Installing the bottle onto the Leshiy 2
Degas gun - locate the bleed screw on the right side of the valve assembly
only crack the bleed; there is a detent ball under the grub screw
after 100% of the air is drained, tighten the screw - do not over tighten
Remove auxiliary air tank arm brace - 4mm hex wrench
place fill probe into the fill port - this keeps the fill assembly from spinning
Unscrew the auxiliary air tube
Unscrew air tube coupling - find the flat spots of the coupling and use a wrench
ensure there is an O-ring at the bottom of the male M18 threads (18X2.5 buna 70)
Thread on the new bottle hand tight
Fill Leshiy 2 -check for leaks
Saber Tactical
MONO-POD BENCH VERSION ST0026
$237.49
$249.99
If your gun already has the Saber Tactical buttstock or you plan to get one, this mono-pod is a great addition to it for bench competition. Very rigid and making horizontal/vertical adjustments is butter smooth!
Features:
Stainless Steel Precision lead screw allowing for smooth micro adjustments
Other metals are aluminum 6061 T6
Rubber bottom for extra grip
No need to loosen knobs before making adjustments
Includes adapter to attach to buttstock
Detach and attach mono-pod to adapter by sliding the mono-pod in.
Strong magnets help keep it secure
Ball joint near the base allowing you to cant
FX
FX Radar Digital Chronograph Display
$229.99
FX Airguns Chronograph Display*WORKS WITH THE FX CHRONOGRAPH, This unit does not have a built in chronograph*This digital display will sync up to the FX Radar Chronograph. It provides an instant velocity reading, without the need to even look away from your scope. The FX Chronograph Display connects via Bluetooth to your FX Chronograph while also allowing your chronograph to still connect to the FX Radar Smartphone App (to allow for its features).Besides showing the feet per second for each shot taken, the display can also be utilized to show magazine shot count, show thebattery charge left in your chronograph, as well as other forthcoming display options. The display has a built-in battery that is recharged via USB-C cord.
FX Digital Chronograph Display
Connects via Bluetooth
Compatible with the FX Radar Chronograph
Compatible with FX Impact and other air rifles with Picatinny side accessory rail
UTG
UTG PRO | Keymod Picatinny Rail Section
$13.95
$14.95
• Proudly Designed and Made in USA• Innovative Rail Edge Design Providing True Continuous Rail Slots When Connecting Multiple Rail Sections• Precision Machined from Aircraft Grade Aluminum Alloy with Anodizing• Includes Required Keymod Compatible Steel Locking Nuts, Steel Allen Screws and Allen Wrench for InstallationItem Number-8 Slot: MTURS04M-4 Slot: MTURS04S
UTG
UTG | Over Bore Bipod QD Mount
$37.97
Quick Detachable Picatinny Mount for the UTG® Over Bore Bipod (TL-BPOB01-A)
Allows for Quick Transferring of the Over Bore Bipod onto other Applications Equipped with Additional QD Mounts
Tension Adjustment Knob Controls the Amount of Tension Felt when Tilting
USER MANUAL
Black Arts Design
Challenger Elite .35 Cal | Barrel Band
$52.00
The Black Arts Design AEA Challenger Elite Barrel Band (AKA Barrel Support Stabilizer) is designed to increase POI consistency and eliminate barrel droop. The split design allows install without removal of the factory muzzle break. Two large channels are built into the barrel band to accept TPU (a rubberized plastic) bushings. These bushings give way just enough to permit an easy install while still providing a tight fit and provide dampening characteristics. The three M3 screws provide a secure fitment. ***Fits only the .35 caliber Challenger Elite***
For the .45 | .50 | .510 caliber follow this link:
https://www.thepelletshop.com/products/challenger-elite-45-510-cal-barrel-band?_pos=3&_psq=elite%20&_ss=e&_v=1.0
Material
Carbon Fiber filled PETG – PETG selected for low shrinkage, resistance to heat, and high dimensional accuracy. The addition of carbon fiber increases flexural modulus (stiffness) well above standard PETG and further increases dimensional accuracy.
TPU – A rubberized plastic with dampening characteristics.
Features
Robust design built for strength and stiffness.
Two internal TPU (rubberized plastic) bushings are built into the barrel section. These bushings function as dampeners and provide an uncompromised fit.
Our split design allows installation without removing the muzzle break.
The cap head screws are secured using a captive nut for a clean appearance.
Bolstered ridge along circumference of Barrel Band increases flexural modulus (stiffness) and aesthetic appeal.
Installation Instructions: https://blackartsdesign.com/aea-challenger-elite-barrel-band-install/
Saber Tactical
FX Panthera/Dynamic Compact Arca Rail ST0073
$137.75
$145.00
PRODUCT DESCRIPTION
Crafted from premium 6061 aluminum, this low profile arca rail enhances the aesthetic of the gun as well as the comfort when shooting off hand. The rail also has a 1/4-20 threaded hole for camera tripod adapters. Underneath the rail are MLok slots to equip the gun with different accessories.
Features:
6061 T6 aluminum
black anodize with lasered logo
threaded nylon tipped grub screw to help rail flex
Extends to the end of a 300cc FX bottle
Black Arts Design
Air Venturi Avenger Bullpup Barrel Band
$30.00
The Gen2 Black Arts Design Barrel Band is designed to reduce the POI shifts inherent in the Air Venturi Avenger Bullpup and tighten groups. The Black Arts Design Barrel Band adds stability to the Avenger Bullpup that is not present in factory configuration. We highly recommend the DonnyFL Avenger Extender 1/2×20 Adapter be paired with our Barrel Band. This package is available here.
Material
Carbon Filled (CF) PETG – CF PETG selected for low shrinkage, resistance to heat, and high dimensional accuracy. The addition of carbon fibers increases flexural modulus (stiffness) well above standard PETG.
TPU (thermoplastic Polyurethane). TPU is extremely flexible and highly resistant to abrasion.
Features
The shroud section houses two TPU bushings to ensure a snug fit while allowing ease of installation.
TPU has rubber like characteristics adding dampening qualities to our barrel band.
No grub screws! The lower section clamps securely with a single M3 alloy steel screw and nut. The nut is held captive within an internal slot providing a secure hold while maintaining a clean appearance.
Bolstered design along the circumference increases flexural modulus (stiffness) and aesthetic appeal.
FX
FX Crown | STX Barrel Kit (Smooth Twist X Superior)
from $299.99
*SHIPS WITH STX - Smooth Twist X Superior LINER*PROBE INCLUDED*MAGAZINES NOT INCLUDED
With this complete barrel kit (Smooth Twist X Superior barrel) for the FX crown you can easily change calibers. The kit consists of a barrel with fixed shroud, a STX Superior liner and a pellet probe. Available in several calibers.
EDgun
EDgun | Leshiy 2 | Aluminum Handguard
from $179.99
The Aluminum handguard comes in 3 sizes and has a full Picatinny rail on the top and bottom with M-Lok licensed slots on the side.
6 inch (150MM) compatible with the 250 barrel and 350 barrel in some configurations
10 inch (250 MM) compatible with 350 and 450 mm barrel in some configurations
15 inch (400 MM) compatible with 450 and 650 mm barrel in some configurations
Included with handguard
Mounting plate
Longer Locking pin
Screws
Saber Tactical
Saber Tactical | Huben GK1 Stock/Brace Adapter ST0085
$33.25
$35.00
PRODUCT DESCRIPTION
Since the Huben GK1 was released, customers have asked for a way to add a buttstock to their pistols. The wait is over. Introducing the Saber Tactical Huben GK1 Stock/Brace Adapter!
Key Features:
Versatile Attachment: Bolt on a rear-facing Picatinny rail and attach any number of folding or rigid stocks to your GK1, increasing stability and accuracy for longer shots.
Quick Installation: The SBA connects to your GK1 with two elongated stainless steel screws (included), replacing the stock screws. Installation requires only 2mm and 4mm Allen wrenches (not included) and takes just a few minutes.
Dual Functionality: Once installed, you can use the airgun in pistol or carbine format without removing the adapter and without losing any of the GK1's functionality.
High-Quality Construction: Machined from 6065 aluminum and anodized black to match the Huben. It sits like a Picatinny backpack on the rear of the action, above the grip's beavertail, leaving full access to the grip, loading mechanism, and iron sights, including elevation adjustment.
Important Information:
Buttstock Sold Separately: Choose from a variety of folding or rigid stocks to customize your setup.
FX
FX Slug Power Kit | Dynamic | DRS | Panthera | King
$49.99
The FX Slug Power Kit is a versatile and high-performance upgrade designed for Panthera, Dynamic, King, and DRS air rifles. This kit includes a tungsten hammer, known for its durability and density, which enhances consistent power delivery for heavier slugs. The slug-probe comes equipped with two O-rings and is pre-configured for 5.5 mm (.22 caliber) slugs.
By utilizing the included caliber sleeves, the slug-probe can easily convert to fit 6.35 mm (.25 caliber) and 7.62 mm (.30 caliber) slugs, providing greater flexibility for air rifle enthusiasts. The O-rings ensure the caliber sleeves are securely fastened, offering optimal performance with no air leakage.
Whether you’re using the FX Panthera, Dynamic, King, or DRS air rifles, this slug power kit allows you to maximize your rifle’s potential with different slug calibers, making it an essential upgrade for anyone looking to improve accuracy, power, and versatility in their shooting experience.
Key features:
Tungsten hammer for consistent power
Convertible slug-probe for multiple calibers
Caliber sleeves for .25 and .30 calibers
O-ring secured sleeves for precision
This FX slug power kit is perfect for air rifle shooters looking to enhance performance and accuracy across different slug calibers.