Saber Tactical
FX MAVERICK TRS RAIL
from $239.99
Saber Tactical Top Tail Support (TRS)
Features:
Integrated bubble level in the rear allowing you to quickly check to make sure your gun is level. A must have for long range shooting.
M-Lok slots allowing you to attach varied accessories such as; flashlight, laser and weights.
Built in 20 MOA, giving your scope more elevation for long range shooting.
Has a Delrin shroud clamp to prevent shroud droop. It minimizes or eliminates any point of impact changes when switching suppressors.
Weight = .8 lb
Note* Highly recommend pairing with the Maverick Cheek riser ST0046
Saber Tactical
Saber Tactical | FX Impact M4 TRS Rail
from $289.99
Unleash Precision and Versatility: The FX Impact M4 TRS Rail (28 1/4") is a game-changer for airgun enthusiasts seeking to enhance the performance and customization of their rifles. Crafted from durable 6061 aluminum, this rail is designed for precision and adaptability, making it the perfect upgrade for any serious shooter.
Key Features:
Enhanced Stability: Prevents shroud drooping and minimizes point of impact (POI) shifts for consistent accuracy.
Quick Detach (QD) Points: Integrated QD sling mounts on both sides for personalized comfort and efficiency.
Integrated Bubble Leveler: Ensures perfect alignment for improved accuracy.
M-Lok Compatibility: Side M-Lok slots for attaching a variety of accessories.
Extended Range: 20 MOA elevation helps you reach out further and hit targets with confidence.
Durable Construction: Made from robust 6061 aluminum for long-lasting performance.
Compatibility: Works with FX Impact M4 and previous FX Impact models.
Shroud Adapter: Comes stock to use with 600mm barrels.
Specifications:
Length: 28 1/4 inches
Weight: 1 lb 8 oz
Black Arts Design
Air Venturi Avenger Barrel Band
$40.00
The Gen2 Black Arts Design Barrel Band System is designed to reduce the POI shifts inherent in the Air Venturi Avenger and tighten its groups. We developed a 2-component system that removes the main problem, the factory barrel band. The Air Venturi Avenger factory barrel band ties the forend of the stock directly to the barrel. Any pressure applied to the forend is fed directly to the barrel via the factory barrel band. Our 2-component system divorces the forend and lower air tube from the barrel. This is accomplished through our Forend Bracket which secures the forend to ONLY the lower air tube. The Forend Bracket does not contact the upper air tube or barrel shroud. This ends the intimate relationship between the stock forend and barrel. Our Barrel Band then ties ONLY the upper air tube and barrel providing stability. These 2 components will tighten groups and drastically reduce the seemingly random POI shifts. We highly recommend the DonnyFL Avenger Extender 1/2×20 Adapter be paired with our 2 component Barrel Band System.
Material
Carbon Filled (CF) PETG – CF PETG selected for low shrinkage, resistance to heat, and high dimensional accuracy. The addition of carbon fibers increases flexural modulus (stiffness) well above standard PETG.
TPU (thermoplastic Polyurethane). TPU is extremely flexible and highly resistant to abrasion.
Features
The shroud section houses two TPU bushings to ensure a snug fit while allowing ease of installation.
TPU has rubber like characteristics adding dampening qualities to our barrel band.
No grub screws! The lower section clamps securely with a single M3 alloy steel screw and nut. The nut is held captive within an internal slot providing a secure hold while maintaining a clean appearance.
Bolstered design along the circumference increases flexural modulus (stiffness) and aesthetic appeal.
Installation Instructions Gen2: https://blackartsdesign.com/avenger-gen2-barrel-band-system-installation/
Installation Instructions (systems sold prior to 04/08/22): https://blackartsdesign.com/air-venturi-avenger-barrel-band-system-install/
ERGO Air
ERGO AIR | TACTICAL DELUXE GRIP | SUREGRIP
$39.99
The ERGO Air Tactical Deluxe Grip features hand-filling palm swells for both left and right-handed shooters. The gripping surface consists of soft, textured SUREGRIP® for a comfortable & secure grip in any condition.
Does Not include a plug - A Tactical Deluxe plug can be purchased here
Saber Tactical
Panthera Rail - ST0057
$325.00
Panthera Rail - ST0057
PRODUCT DESCRIPTION
Our Saber Tactical Panthera rail has already proven itself in competition helping our shooters bring home the gold in PRS competitions. It adds the rigidity and weight needed to shoot accurately in different positions.
Features:
The main body is made of lightweight T6 aluminum.
Removable brass inserts for added weight
Mlok slots on the side allow shooters to add more weight to their setup
Allows you to use a 300cc bottle when the middle brass weight is removed. Will require Panthera front bottle adapter ST0056.
Jimping pattern underneath the rail to help grip shooting bags
Wider than the factory rail
Length = 17.71 in, Width = 1.96 in
Weight = 4 pounds
Add an extra pound of weight with our brass bridge ST0059
FX Airguns
FX | Carbon Fiber Bottle w/ Valve | 300 BAR
from $329.99
New FX Carbon Fiber Bottle now with a max fill pressure of 300 bar!
Compatible with FX Crown, Maverick, and Impact PCP Air Rifles
Compatible with some Dreamline models*
Includes valve
*Bottle adapter required for Deamline models*
Black Arts Design
AEA Challenger Standard .45 cal - .510 cal | Barrel Band
$42.00
The Black Arts Design AEA Challenger Standard Big Bore Barrel Band (AKA Barrel Support Stabilizer) is designed to increase POI consistency and eliminate barrel droop instigated by the use of large moderators.
Material
Carbon Fiber filled PETG – PETG selected for low shrinkage, resistance to heat, and high dimensional accuracy. The addition of carbon fiber increases flexural modulus (stiffness) well above standard PETG and further increases dimensional accuracy.
TPU – A rubberized plastic with dampening characteristics.
Features
Robust design built for strength and stiffness.
2 internal TPU (rubberized plastic) bushings are built into the barrel section. These bushings act as dampeners as well as aiding in installation without compromising a tight fit to the barrel.
The cap head screw is secured using a captive nut for a clean appearance.
Bolstered ridge along circumference of Barrel Band increases flexural modulus (stiffness) and aesthetic appeal.
Installation Instructions:https://blackartsdesign.com/aea-zeus-and-challenger-standard-barrel-band-installation/
Airmarksman
Airmarksman Microbore Hose
$79.99
Microbore hose with fitting pre-installed
3 FT Length
Comes with one standard length quick disconnect fitting and one extended length quick disconnect fitting.
Extended fitting makes removing quick disconnect from the FX Impact much easier.
Saber Tactical
FX IMPACT MAGNETIC ARM LOCK - ST0048
$35.00
This magnetic arm lock help keep the cocking arm open. Useful during competition when you are required to keep the bolt open.
Features:
6061 T6 Aluminum
Black anodized
Stainless steel screw
Easy install
Weigh only 1oz
Installation instruction:
Highly recommend you remove the bottle
Fire the gun to remove any air in the plenum
Unscrew bolt in front of plenum. See picture 1
Install Magnetic Arm Lock
Saber Tactical
MONO-POD FIELD VERSION ST0027
$149.99
If your gun already has the Saber Tactical buttstock or you plan to get one, this mono-pod is a great addition for field use. Even if the the shooting surface is not perfectly fat, the ball joint easily adjust to it.
Features:
Stainless Steel Precision lead screw allowing for smooth micro adjustments
Other metals are aluminum 6061 T6
Rubber bottom for extra grip
No need to loosen knobs before making adjustments
Includes adapter to attach to buttstock
Detach and attach mono-pod to adapter by sliding the mono-pod in.
Strong magnets help keep it secure
Ball joint near the base allowing you to cant
Saber Tactical
Saber Tactical | Huben GK1 Stock/Brace Adapter ST0085
$35.00
PRODUCT DESCRIPTION
Since the Huben GK1 was released, customers have asked for a way to add a buttstock to their pistols. The wait is over. Introducing the Saber Tactical Huben GK1 Stock/Brace Adapter!
Key Features:
Versatile Attachment: Bolt on a rear-facing Picatinny rail and attach any number of folding or rigid stocks to your GK1, increasing stability and accuracy for longer shots.
Quick Installation: The SBA connects to your GK1 with two elongated stainless steel screws (included), replacing the stock screws. Installation requires only 2mm and 4mm Allen wrenches (not included) and takes just a few minutes.
Dual Functionality: Once installed, you can use the airgun in pistol or carbine format without removing the adapter and without losing any of the GK1's functionality.
High-Quality Construction: Machined from 6065 aluminum and anodized black to match the Huben. It sits like a Picatinny backpack on the rear of the action, above the grip's beavertail, leaving full access to the grip, loading mechanism, and iron sights, including elevation adjustment.
Important Information:
Buttstock Sold Separately: Choose from a variety of folding or rigid stocks to customize your setup.
FX
FX Slug Power Kit | Dynamic | DRS | Panthera | King
$49.99
The FX Slug Power Kit is a versatile and high-performance upgrade designed for Panthera, Dynamic, King, and DRS air rifles. This kit includes a tungsten hammer, known for its durability and density, which enhances consistent power delivery for heavier slugs. The slug-probe comes equipped with two O-rings and is pre-configured for 5.5 mm (.22 caliber) slugs.
By utilizing the included caliber sleeves, the slug-probe can easily convert to fit 6.35 mm (.25 caliber) and 7.62 mm (.30 caliber) slugs, providing greater flexibility for air rifle enthusiasts. The O-rings ensure the caliber sleeves are securely fastened, offering optimal performance with no air leakage.
Whether you’re using the FX Panthera, Dynamic, King, or DRS air rifles, this slug power kit allows you to maximize your rifle’s potential with different slug calibers, making it an essential upgrade for anyone looking to improve accuracy, power, and versatility in their shooting experience.
Key features:
Tungsten hammer for consistent power
Convertible slug-probe for multiple calibers
Caliber sleeves for .25 and .30 calibers
O-ring secured sleeves for precision
This FX slug power kit is perfect for air rifle shooters looking to enhance performance and accuracy across different slug calibers.
FX
FX | Keller Digital Gauge
$179.99
The FX Keller Digital Gauge, also known as Manometer, is a digital pressure gauge replacement for the FX Impact M3 PCP Air Rifle. It features incredible accuracy and consistency in a digital display format, making it essential for fine-tuning the air rifle's accuracy. The lithium battery is easy to swap and will last up to three years.
FX Keller Digital Manometer
Replaces factory gauges.
lithium battery with up to 3 years of use and can be easily replaced.
Works with FX Impact M3 models.
Rapid Air Worx
RAW | HM1000x Multi Shot Magazine
$71.95
$75.00
The RAW HM1000x Magazine lets you shoot for longer and spend less time reloading. Buy extras and load them before you start so you won't waste as much time when you're in the middle of shooting. This version is designed to load from the left hand side of the RAW HM1000x.
.22 Cal - 12 Rounds
.25 Cal - 12 Rounds
.30 Cal - 9 Rounds
Works in both RH and LH actions
Works with the RAW HM1000x
Please note: If you're using a large sidewheel or have a side parallax adjustment on your scope, we recommend using the right hand loading magazine.
EDgun
EDgun | Leshiy 2 | Speed Loader
$194.99
The EDgun Leshiy 2 Speed Loader is a step forward in the evolution of speed loaders; unlike previous homemade versions, this model is CNC machined aluminum and hard anodized. The unit is then finished in PFTE, ensuring smooth operation while loading and locking the individual sections. With other 3D-printed models, the speedloaders required the user to remember what bay (cylinder) is loaded. It was common to double load a port while dropping the projectiles in the hole. On the EDgun Speed Loader, the pellets are held at the top for easy visualization. Once all eight ports are filled, a lever drops all the bullets at once. This unique process adds ease and speed to preloading the Speed Loader.
Hard-Anodized
PFTE Finish
All Aluminum Construction
Unique Loading Feature
Built-in Magnet
6 Magazine Capacity
Caliber Marking
EDgun Quality