UTG
UTG PRO | AR15 6-POSITION RECEIVER EXTENSION TUBE | MIL-SPEC
$17.99
Part Number: TLU001
• 6-position Mil-spec Diameter Receiver Extension Tube for AR15 Rifles• Extension Tube CNC Machined from 6061-T6 Aircraft Grade Aluminum with Precisely Rolled Threads for Durable Thread Engagement with Lower Receiver• Underwent the Tightest Tolerance Controls for a Secure Fit and Function with Various Collapsible Stocks• Finished in a Matte Black Type III Class II Hard Coat Anodize• Proudly Designed and Made in USA
HEIGHT (IN)
1.5
HEIGHT (MM)
36.8
LENGTH (IN)
7.3
LENGTH (MM)
184.2
WIDTH (IN)
1.1
WIDTH (MM)
27.94
UTG
UTG PRO | AR15 OPS READY S1 MIL-SPEC STOCK ONLY
$34.50
Part Number: RBUS1BMS
Proudly Designed and Made in USA
Built for Heavy-duty Operations with Tightest Tolerance Control Providing the Most Secure Fit and Silent Operation
Mil-spec Stock Molded from Impact Resistant High-strength Polymer in Black
Built-in Rubberized Butt Pad, Chamfered Front and Rear Edges and Slanted Cheek Rest Surface Further Enhances Shooting Stability and Consistent Firearm Control
Dual Storage Compartments with Removable Waterproof Caps Provide Dry Storage for Batteries (Up to 8 CR123) and/or Other Essential Accessories
Integral Ambidextrous Sling Loop and QD Sling Swivel Housing for Left or Right Handed Shooters
Extended 8" Length for Increased Length of Pull - Combine with our Super Slim Handguards for Superior Firearm Handling
Polymer Stock Only
HEIGHT (IN)
5.5
LENGTH (IN)
8.5
LENGTH (MM)
215.9
WIDTH (IN)
2.3
UTG
UTG PRO | Keymod Picatinny Rail Section
$13.95
$14.95
• Proudly Designed and Made in USA• Innovative Rail Edge Design Providing True Continuous Rail Slots When Connecting Multiple Rail Sections• Precision Machined from Aircraft Grade Aluminum Alloy with Anodizing• Includes Required Keymod Compatible Steel Locking Nuts, Steel Allen Screws and Allen Wrench for InstallationItem Number-8 Slot: MTURS04M-4 Slot: MTURS04S
UTG
UTG Recon 360 TL Bipod | Picatinny
$73.99
$89.99
UTG Recon 360 TL Bipod
Features:
•
3 Position Folding Legs and Lockable Leg Extensions Equipped with Nonslip Rubberized Foot Pads
•
Center Height Adjustable from 5.5"-7" | 7"-9" | 8"-12"
•
Fine-tunable Tension Adjustment Lever Applies the User Desired Amount of Tension to the Bipod's 360° Panning & 15° Forward, Rearward, Left, and Right Tilt
•
Low Profile Offset Picatinny Mount with Knurled Thumb Nut and Reinforced Steel Cross Bolt
•
Durable Aircraft Aluminum Construction Finished in a Matte Black Anodization
UTG
UTG | .22/Airgun to Picatinny/Weaver Low Pro Snap-in Adaptor Mount
$12.99
•
.22/Airgun Dovetail to Picatinny/Weaver Rail Adaptor
•
Innovative Rail Platform to Convert Most .22/Airgun Rails
•
Top Slot with Spring Tension Retraction/Expansion Design to Snap into Picatinny/Weaver Base
•
Extremely Low Profile and Lightweight
•
Precision and Repeatable Alignment
•
Easy Installation with Most .22/Airgun Rails, 2PCs/Set
•
Removable Stop Pin for Extra Secure Installation
UTG
UTG | Dovetail to Picatinny/Weaver Rail Adaptor Mount
$14.99
$15.99
• Matte Black Anodized 6061-T6 Aluminum Construction
• 3.94" Scalloped 9 Slot Picatinny Rail with 0.59" Saddle Height
• Compatible with Most 9mm - 11mm Flat or Round Dovetail Rails
• Full Length Locking Side Plate for a Secure and Repeatable Zero Hold
• Optional Recoil Stop Pin Provides Additional Retention Against Bidirectional Recoil
UTG
UTG | Over Bore Bipod QD Mount
$37.97
Quick Detachable Picatinny Mount for the UTG® Over Bore Bipod (TL-BPOB01-A)
Allows for Quick Transferring of the Over Bore Bipod onto other Applications Equipped with Additional QD Mounts
Tension Adjustment Knob Controls the Amount of Tension Felt when Tilting
USER MANUAL
UTG
UTG | Over Bore Bipod | 7"-11" Center Height | Picatinny
$169.99
$184.99
Quick Detachable Picatinny Base Designed to Mount onto the Top or Bottom Picatinny Rail of Handguards
•
Wide Open Angle Improves Stability
•
Matte Black Anodized Aircraft Aluminum Construction with Reinforced Steel Components
•
3 Position Folding Legs Equipped with Rubberized Foot Pads
•
Lockable and Height Adjustable Legs Providing a Center Height from 7"-11"
•
22° Panning and 44° Tension Adjustable Left and Right Tilt
•
Posi-lock Push Buttons Feature a Large Surface Area for Easier Use while Wearing Gloves
ITEM NUMBER :
TL-BPOB01-A
UTG
UTG | PUSH BUTTON QD SLING SWIVEL | 1.25" C-SHAPE LOOP
$8.99
Part Number: TL-QDSW08C
•Made from High Strength Steel with Black Finish•Precision Production for Optimal Fit with Universal Housing on Stock and Rails
UTG
UTG | QD SLING SWIVEL ADAPTOR, PICATINNY 45 DEGREE ANGLED OFFSET
$12.50
Part Number: TL-SWPM01
• UTG Low Profile Picatinny-mount 45 Degree Angled Offset Quick-detach Sling Swivel Adaptor• Precision Machined from Aircraft Grade Aluminum with Hard Anodizing Matte Black Finish• Rugged Mounting Base with Max Strength Torx Drive Locking Screw to Fit on Picatinny Rail,• Extremely Compact, Lightweight, and Super Low Profile• Accepts any Quick Detach Sling Swivel with 0.37” Diameter Swivel Stud• Mount Reversible for Right- or Left-handed Sling Use• QD Swivel Housing Designed with Quarter-turn Rotational Overtravel Stops to Better Control Sling Position and Movement• Includes T20 Torx Allen Wrench for Simple and Friendly Installation, No Gunsmith Required
UTG
UTG | SINGLE POINT BUNGEE SLING WITH QD SLING SWIVEL
$27.95
Part Number: PVC-GB507B
• Heavy Duty 1.5" Quick Adjustable Polyester Webbing and Elastic Construction• Steel Push Button Quick Detach Sling Swivel Attachment for Quick Installation and Removal• Durable Bungee System Reduces Fatigue by Relieving the Felt Weight of the Firearm Away from the User's Shoulder• Inner Length Adjustable from 42" to 58" to Accommodate Various Body Types and Gear