AEA Precision Airguns
Challenger Series | Standard 24" Air Rifle
from $359.00
FOR AEA CHALLENGER SERIES DONNYFL MODERATOR ADAPTERS CLICK HERE
**The .35 cal version does NOT have a power wheel adjuster, it is only available on the .22 - .30 cal model **
AEA Precision Airguns
Challenger Series | Bullpup BIG BORE (Side Lever) Air Rifle
from $659.00
$729.00
New .510 Cal comes with a update valve that produces up to 650 FPE. Up to 1000 FPS with 300 Gr slugs.
Correct weight is 13 Lbs***
AEA Precision Airguns
Challenger Series | Standard BIG BORE (Side Lever) Air Rifle
from $609.00
$679.00
New .510 Cal comes with a update valve that produces up to 650 FPE. Up to 1000 FPS with 300 Gr slugs.
Correct weight is 12-13 lbs***
AEA Precision Airguns
Challenger Series | Bullpup 24" Air Rifle
from $459.00
**The .35 cal version does NOT have a power wheel adjuster, it is only available on the .22 - .30 cal model **
FOR AEA CHALLENGER SERIES DONNYFL MODERATOR ADAPTERS CLICK HERE
AEA Precision Airguns
AEA | Challenger Elite | Regulated
$1,050.00
USER MANUAL
SPECIFICATIONS:
BARREL LENGTH 30"
OVERALL LENGTH 42"
WEIGHT 12LB
SIDE LEVER BOLT ACTION
BOLT ACTION/SINGLE SHOT/MAGAZINE FED
.35 CALIBER HAS 10 ROUND MAGAZINES
.45, .50 & .51 MAGAZINES ARE 6 ROUND MAGAZINES
AIR TANK CAPACITY 500CC
MAX TANK AND OPERATING PRESSURE IS 4500 PSI
COMES WITH MUZZLE BREAK
EXTERNALLY ADJUSTABLE REGULATOR
WALNUT WOOD STOCK
PICATINNY RAIL ON TOP
How do I adjust my External Regulator?
This application applies to the Elites and the SF Models.
Tools that you will need: 5mm Hex Tool
INSERT TOOL INTO 5MM HEX SCREW/REGULATOR ADJUSTER SCREW ON THE BOTTOM OF THE REGULATOR NEXT TO THE AIR TANK PRESSURE GAUGE. (THE REGULATOR PRESSURE GAUGE IS ON THE RIGHT SIDE OF THE ELITE MODELS AND ON THE BOTTOM OF THE BLOCK ON THE SF MODELS) LOOKING AT THE REGULATOR ADJUSTER SCREW TURN IT COUNTERCLOCKWISE TO INCREASE AND CLOCKWISE TO DECREASE. YOU CAN'T DECREASE WHILE UNDER PRESSURE.
IF YOU WANT TO DECREASE YOU WILL HAVE TO DE-GAS THE GUN BY SLOWLY LETTING THE AIR OUT OF THE AIR TANK BY LOOSENING THE AIR GAUGE. ONCE THE AIR TANK IS EMPTY YOU WILL HAVE TO DRY FIRE THE GUN ONCE OR TWICE TO REMOVE ANY AIR HELD BY THE REGULATOR PLENUM.
ONCE ALL THE AIR HAS BEEN REMOVED FROM THE GUN YOU CAN MAKE THE REGULATOR ADJUSTMENT. AFTER YOU MADE YOUR REGULATOR ADJUSTMENT YOU SIMPLY FILL YOUR AIR TANK BACK UP AND YOUR GOOD TO GO.
NEVER DECREASE WHILE UNDER PRESSURE, IT WILL DAMAGE THE REGULATOR AND VOID THE WARRANTY.
TO INCREASE REGULATOR PRESSURE, YOU DO NOT HAVE TO DE-GAS THE GUN. WHEN INCREASING OR DECREASING PLEASE DO NOT TURN THE REGULATOR ADJUSTING SCREW MORE THEN 1/4 TURN AND THEN CHECK YOUR RESULTS.
PLEASE DO NOT OVER ADJUST, THIS ALSO WILL DAMAGE THE REGULATOR. A CHRONOGRAPH WILL HELP MEASURE YOUR RESULTS.