Leapers
UTG MAX STRENGTH 1" | 2 PC | PICATINNY Rings
$21.99
ITEM NUMBER : RG2W1154
•
4-screw Medium Profile "Tiger" Ring
•
Machined from Aircraft Aluminum Alloy with Heavy Duty Steel Locking Plate for Maximum Strength Holding Zero
•
Twist Lock Design for Quick and User Friendly Easy Installation
•
Light Weight with See-through Tunnel and Slot Cut on Ring Top
•
High Quality Synthetic Protective Tape on Rings' Inner Surface to Protect Your Equipment
•
Optimized Dimensions for Best Fit on All Picatinny/Weaver Rails
•
Strong Recoil Stop Cross Bolt for Optimized Fit and Zero
ITEM NUMBER : RG2W1204
•
4-screw High Profile "tiger" Ring
•
Machined from Aircraft Aluminum Alloy with Heavy Duty Steel Locking Plate for Maximum Strength Holding Zero
•
Twist Lock Design for Quick and User Friendly Easy Installation
•
Light Weight With See-through Tunnel and Slot Cut on Ring Top
•
High Quality Synthetic Protective Tape on Rings' Inner surface to protect your Equipment
•
Optimized Dimensions for Best Fit on All Picatinny/Weaver Rails
•
Strong Recoil Stop Cross Bolt for Optimized Fit and Zero
Leapers
UTG PRO P.O.I | 2 PCs Medium Profile | PICATINNY Rings
$55.95
$64.99
Proudly Designed and Made in USA
•
Medium Profile P.O.I® (Precision Optics Interface) Rings Have a 30mm Center Height to Fit Optics with a 30mm Tube and up to a 59mm Outer Objective
•
The Innovative P.O.I® (Precision Optics Interface) Addresses 3 of the Most Critical Areas in Scope Rings -a) Progressively Machined for a Precise Inner Ring Surface to Achieve a Seamless Ring-to-Scope Interactionb) Low Profile and Flush-fitting Locking Side Plate Controlled by Dual Spring Loaded Guide Rods Interfacing with the Rail with Torx Screw Locking to Ensure Secure and Repeatable Zero Holdc) Square-shaped Integral Recoil Stop Interfacing with a Picatinny Slot via Complete Surface Contact to Eliminate the Possibility of Forward and Aft Movement from Recoil Vibrations
•
2 Piece Ring Set, Each Equipped with 4 Top Torx Screws and Designed with a 22mm Ring Width
•
Designed to Fit on Mil-spec 1913 Picatinny Rail Platforms
•
Machined from 6061-T6 Aluminum Alloy and 4605 Steel with Matte Black Hard Coat Anodize
•
UTG PRO® Original Snag-free Contoured Profile with Reduced Weight and Size
Leapers
UTG PRO P.O.I | 2 PCs High Profile | PICATINNY Rings
$55.95
$64.99
ITEM NUMBER : RDU013022
•
Proudly Designed and Made in USA
•
High Profile Precision Optics Interface (P.O.I®) Scope Rings Have a 37mm Center Height to Fit 30mm Tube Optics with up to a 73mm Outer Objective Diameter
•
The innovative Precision Optics Interface (P.O.I®) Addresses 3 of the Most Critical Areas in Scope Rings -a) Progressively Machined and Precise Inner Diameter to Achieve a Seamless Interface Between the Scope Ring and Tubeb) Torx Screw Locking Side Plate Controlled by Dual Spring Loaded Guide Rods Precisely Clenches Dovetail Rail for a Secure and Repeatable Zero Holdc) Removable Threaded Recoil Stop-pin Provides an Additional Interface Point with the Dovetail Rail for Added Security Against Bidirectional Recoil
•
Original Snag-free Contoured Profile with Reduced Weight and Size
•
6061-T6 Aircraft Aluminum and Steel Construction with a Matte Black Finish
•
2 Piece Ring Set, Each Equipped with 4 Top Torx Screws, Mounts onto Most Dovetail Rails
Leapers
UTG PRO P.O.I | 2 PCs High Profile | DOVETAIL Rings
$55.95
$64.99
Proudly Designed and Made in USA
•
High Profile Precision Optics Interface (P.O.I®) Scope Rings Have a 37mm Center Height to Fit 30mm Tube Optics with up to a 73mm Outer Objective Diameter
•
The innovative Precision Optics Interface (P.O.I®) Addresses 3 of the Most Critical Areas in Scope Rings -a) Progressively Machined and Precise Inner Diameter to Achieve a Seamless Interface Between the Scope Ring and Tubeb) Torx Screw Locking Side Plate Controlled by Dual Spring Loaded Guide Rods Precisely Clenches Dovetail Rail for a Secure and Repeatable Zero Holdc) Removable Threaded Recoil Stop-pin Provides an Additional Interface Point with the Dovetail Rail for Added Security Against Bidirectional Recoil
•
Original Snag-free Contoured Profile with Reduced Weight and Size
•
6061-T6 Aircraft Aluminum and Steel Construction with a Matte Black Finish
•
2 Piece Ring Set, Each Equipped with 4 Top Torx Screws, Mounts onto Most Dovetail Rails
Leapers
UTG ACCU-SYNC QR | 2 PCs High Profile | PICATINNY Rings
$74.99
$84.99
ITEM NUMBER: AQR322 (30mm) | AQR420 (34mm)
•
Precision CNC Machined from 6061-T6 Aluminum and Finished in a Matte Black Anodization
•
Lightening Cuts Reduce Overall Weight Without Compromising Durability
•
All Sharp Edges and Corners Removed and Radiused
•
Quick Release (QR) Mount Features Tool-free Tension Adjustment, Locking Quick Release Lever, and Squared Recoil Stops for a Secure Zero Hold and Return to Zero
•
(34MM) 20mm Saddle Height, 37mm Center Height, Fits 34mm Tube Optics with an Objective Outer Diameter up to 74mm(30MM) 22mm Saddle Height, 37mm Center Height, Fits 30mm Tube Optics with an Objective Outer Diameter up to 74mm
Leapers
UTG ACCU-SYNC QR | 2 PCs Medium Profile | PICATINNY Rings
$74.99
$84.99
ITEM NUMBER: AQR315 (30mm) | AQR415 (34mm)
•
Precision CNC Machined from 6061-T6 Aluminum and Finished in a Matte Black Anodization
•
Lightening Cuts Reduce Overall Weight Without Compromising Durability
•
All Sharp Edges and Corners Removed and Radiused
•
Quick Release (QR) Mount Features Tool-free Tension Adjustment, Locking Quick Release Lever, and Squared Recoil Stops for a Secure Zero Hold and Return to Zero
•
(34MM) 15mm Saddle Height, 32mm Center Height, Fits 34mm Tube Optics with an Objective Outer Diameter up to 64mm(30MM) 15mm Saddle Height, 30mm Center Height, Fits 30mm Tube Optics with an Objective Outer Diameter up to 60mm
Leapers
UTG PRO P.O.I | 2 PCs Medium Profile | DOVETAIL Rings
$55.95
$64.99
•
Proudly Designed and Made in USA
•
Medium Profile Precision Optics Interface (P.O.I®) Scope Rings Have a 30mm Center Height to Fit 30mm Tube Optics with up to a 59mm Outer Objective Diameter
•
The innovative Precision Optics Interface (P.O.I®) Addresses 3 of the Most Critical Areas in Scope Rings -a) Progressively Machined and Precise Inner Diameter to Achieve a Seamless Interface Between the Scope Ring and Tubeb) Torx Screw Locking Side Plate Controlled by Dual Spring Loaded Guide Rods Precisely Clenches Dovetail Rail for a Secure and Repeatable Zero Holdc) Removable Threaded Recoil Stop-pin Provides an Additional Interface Point with the Dovetail Rail for Added Security Against Bidirectional Recoil
•
Original Snag-free Contoured Profile with Reduced Weight and Size
•
6061-T6 Aircraft Aluminum and Steel Construction with a Matte Black Finish
•
2 Piece Ring Set, Each Equipped with 4 Top Torx Screws, Mounts onto Most Dovetail Rails
Leapers
UTG ACCU-SYNC | LEVELER
$27.49
$29.99
ITEM NUMBER: MT-RTR3 (30mm) | MT-RTR4 (34mm)• Ergonomically Dehorned Corners and Melted Contours• Compatible with 34mm UTG® ACCU-SYNC® Cantilever Mounts and Rings• Magnetic Flip-to-Side Anti-Cant Bubble Leveler• Durable Matte Black Anodized 6061-T6 Aluminum ConstructionNOTE: We recommend to tighten the ring top screws with a torque value of about 25 inch-lb.