EDgun

The Aluminum handguard comes in 3 sizes and has a full Picatinny rail on the top and bottom with M-Lok licensed slots on the side.     6 inch (150MM) compatible with the 250 barrel and 350 barrel in some configurations  10 inch (250 MM) compatible with 350 and 450 mm barrel in some configurations  15 inch (400 MM)  compatible with 450 and 650 mm barrel in some configurations Included with handguard  Mounting plate Longer Locking pin Screws  

Leshiy 2 Magazine Leshiy 2 OEM magazine  8 round comes with a retention magnet aluminum (.35 Cal is Titanium) PTFE coated for smooth operation magazine holder sold separately 

The EDgun Leshiy 2 Speed Loader is a step forward in the evolution of speed loaders; unlike previous homemade versions, this model is CNC machined aluminum and hard anodized. The unit is then finished in PFTE, ensuring smooth operation while loading and locking the individual sections. With other 3D-printed models, the speedloaders required the user to remember what bay (cylinder) is loaded. It was common to double load a port while dropping the projectiles in the hole. On the EDgun Speed Loader, the pellets are held at the top for easy visualization. Once all eight ports are filled, a lever drops all the bullets at once. This unique process adds ease and speed to preloading the Speed Loader. Hard-Anodized PFTE Finish All Aluminum Construction Unique Loading Feature Built-in Magnet 6 Magazine Capacity  Caliber Marking EDgun Quality 

Leshiy 2 Recommend Slugs .22 Cal NSA (Click Here)-20.2 Gr | .219 -24.8 Gr | .219 .25 Cal NSA (Click Here)-33.6 Gr | .254 -38.5 Gr | .254 .30 Cal NSA (Click Here) -47.2 Gr | .303-61.5 Gr | .303 The EDgun Leshiy 2 R.E.P.R is a step forward in modern PCP design.  The Leshiy 2 is hammerless and uses a new valve that allows consistent dwell time regardless of regulator pressure.  This system allows for rapid opening and closing, and the user no longer has to worry about wear and tear with higher regulator pressure requiring a heavy hammer strike on the valve stem.  Offered in a long (350mm barrel) or a short (250mm barrel), the Leshiy 2 is modular, multi-caliber, and accommodates the user looking for an EDC backpack model, a 450 mid-range short barrel rifle, to a  600mm barrel long range airgun The REPR is a transverse or perpendicular micro regulator that is only a few MM tall.  It uses a cup that is screwed into the plenum sideways.  A mini Belleville washer stack is used along with a single-piston O-ring.  Placed between the air reservoir and plenum is a debris plug that prevents contaminants from entering the regulator.  The REPR is capable of regulating the plenum pressure between 60-280 BAR.  The black disc is used to either increase or decrease pressure in the plenum.  With the REPR,  increase and decrease of the regulator pressure can be done while the gun is fully charged, no need to degas the Leshiy to adjust the regulator.Additionally, the REPR is equipped with a removable plug with 1/8 BSPP threads; this is used to check the plenum's pressure if desired.    The key to this system is not the volume of the plenum nor the fact that the pressure can go so high - but the combination of the patented valve and high-pressure regulator.  No need to waste money on "power plenums" or other snake oil items.,  Leave those upgrades for traditional valve systems.  The new REPR comes complete with everything you need, straight from EDgun.  Ed has a tradition of selling guns that don't need aftermarket gizmos to ensure performance.  The new REPR is ready directly from EDgun without having to pay for extra items. Edgun Leshiy short R.E.P.R. specs  OAL 25.5 inches OAL Folded 13.5 inches LOP 15 inches to the center of the trigger Trigger grip LOO 3.8 inches air reservoir volume 170 CC hammerless semi-automatic  8 round rotary magazine (detachable) weight 5 pounds  barrel length 250MM (9.8 inches) Trigger - single-stage nonadjustable  1 pound pull Picatinny top rail -20 MOA Picatinny bottom rail - 5 slot   Regulator capacity (adjustable) 60-280 BAR Included with the gun 2 magazines included (8 round) OEM Silencer 2 magazine holders fill probe spare transfer ports 1 spare magazine magnet Shot count / Speed / Working Pressure 177 Caliber  900 FPS 10.34 grain 36 shots per fill 90-300 bar .22  Caliber 870 FPS (18.1 grain) 28 Shots per fill 120-300 BAR .25 Caliber 800 FPS (25.39 grain)  22 shots per fill 130-300 bar .30 caliber 740 FPS (44.75 grain) 18 shots per fill 130-300 bar

Leshiy 2 Recommend Slugs .22 Cal NSA (Click Here)-20.2 Gr | .219-24.8 Gr | .219 .25 Cal NSA (Click Here)-33.6 Gr | .254-38.5 Gr | .254.30 Cal NSA (Click Here) -47.2 Gr | .303-61.5 Gr | .303 The EDgun Leshiy 2 R.E.P.R. is a step forward in modern PCP design.  The Leshiy 2 is hammerless and uses a new valve that allows consistent dwell time regardless of regulator pressure.  This system allows for rapid opening and closing, and the user no longer has to worry about wear and tear with higher regulator pressure requiring a heavy hammer strike on the valve stem.  Offered in a long (350mm barrel) or a short (250mm barrel), the Leshiy 2 is modular, multi-caliber, and accommodates the user looking for an EDC backpack model, a 450 mid-range short barrel rifle, to a  600mm barrel long range airgun The REPR is a transverse or perpendicular micro regulator that is only a few MM tall.  It uses a cup that is screwed into the plenum sideways.  A mini Belleville washer stack is used along with a single-piston O-ring.  Placed between the air reservoir and plenum is a debris plug that prevents contaminants from entering the regulator.  The REPR is capable of regulating the plenum pressure between 60-280 BAR.  The black disc is used to either increase or decrease pressure in the plenum.  With the REPR,  increase and decrease of the regulator pressure can be done while the gun is fully charged, no need to degas the Leshiy to adjust the regulator.Additionally, the REPR is equipped with a removable plug with 1/8 BSPP threads; this is used to check the plenum's pressure if desired.    The key to this system is not the volume of the plenum nor the fact that the pressure can go so high - but the combination of the patented valve and high-pressure regulator.  No need to waste money on "power plenums" or other snake oil items.,  Leave those upgrades for traditional valve systems.  The new REPR comes complete with everything you need, straight from EDgun.  Ed has a tradition of selling guns that don't need aftermarket gizmos to ensure performance.  The new REPR is ready directly from EDgun without having to pay for extra items Edgun Leshiy Long R.E.P.R.  specs  OAL 29.25 inches OAL Folded 17.5 inches LOP 15 inches to the center of the trigger Trigger grip LOO 3.8 inches air reservoir volume 170 CC hammerless semi-automatic  8 round rotary magazine (detachable) weight 5.25 pounds Trigger - single-stage nonadjustable  1 pound pull Picatinny top rail -20 MOA Picatinny bottom rail - 5 slot  Barrel length 350 MM (13.75 inches) Regulator capacity (adjustable) 60-280 BAR Included with the gun 2 magazines included (8 round) OEM Silencer 2 magazine holders fill probe spare transfer ports 1 spare magazine magnet Shot count / Speed / Working Pressure 177 Caliber  945 FPS 10.34 grain 36 shots per fill 90-300 bar .22  Caliber 915 FPS (18.1 grain) 28 Shots per fill  120-300 BAR .25 Caliber  850FPS (25.39 grain)  22 shots per fill 130-300 bar .30 caliber 805 FPS (44.75 grain) 18 shots per fill 130-300 bar

EDgun Leshiy 2 | 9MM (.35 Cal) Introducing the EDgun Leshiy 2 9mm (.357) SBR 350 MM barrel, the perfect EDC airgun for those who demand power and portability. Made in the USA, this compact airgun is a must-have for any outdoor enthusiast. Equipped with a .357 Blackout Kit and all the premium accessories you need, including a Behemoth Suppressor, FDE Micarta grip, 350cc bottle, Muzzle Brake, Reg Adjustment Tool, 2 Picatinny Rail Sections, and Monster Plenum, the Leshiy 2 9mm is ready for action straight out of the box. With its lightweight and foldable design, the Leshiy 2 9mm can easily fit into a standard day pack, making it the ultimate choice for those on the go. The quick detach behemoth suppressor makes it even more compact, ensuring you can take it anywhere. The Leshiy 9MM (.35) still can take smaller calibers, allowing the user to turn the 9MM into the  Super Leshiy for long-range slug shooting.  Don't let its small size fool you; the Leshiy 2 9mm packs a powerful punch, making it easy to take down larger game. It's the ultimate EDC airgun, keeping you prepared for any situation. Get your hands on the EDgun Leshiy 2 9mm and experience the power of a compact airgun made in the USA. EDgun Leshiy 2 9MM Specs Alfa Precision Barrel   Polygonal barrel Twist 1:15 Right hand  Lands .349 (8.87MM) Grooves .355 (9.02MM) No Choke Weight 6.4 LB (350mm) | 6.8 LB (450mm) | 7.25 LB (600mm) OAL  with Behemoth - 37" (350mm) | 41" (450mm) | 47" (600mm) Folded with Behemoth 25" (350mm) | 29" (450mm) | 35" (600mm) Folded without Behemoth - 19" (350mm) | 23" (450mm) | 25" (600mm) Reservoir Volume 480CC (with plenum) Blackout Kit Tri-Lug Muzzle Brake 350MM M-Lok | 450MM M-Lok | 600MM M-Lok 5 Section Behemoth Tri-Lug Behemoth Tri-lug REPR Adjustment Tool Custom Gauge FDE Micarta Grip Custom 350CC bottle (300BAR) Monster Plenum Multi-Caliber Capable  Made In the USA Approximate Performance  81 Grain JSB760-800 FPS (350mm) | 830-860 FPS (450mm) | 880-910 FPS (600mm) Shot count 10-16 (depending on regulator setting) Regulator setting 150-170