AirMaks Arms
AirMaks KATRAN & KRAiT | Magazine
$74.99
Self-indexing magazines for rifles series KATRAN & KRAiT.
4,5 (.177) 18 shots
5,5 (.22) 16 shots
6,35 (.25) 14 shots
Western Airguns
Western Airguns | Sidewinder Moderator adapter
$44.99
The Western Airguns Sidewinder moderator adapter is a premium quality accessory designed to replace the factory moderator and provides a conventional 1/2” UNF thread. This to allows the Sidewinder to accept an after-market airgun moderator. Includes Thread Protector End Cap.
Black Arts Design
Challenger Elite .45 / .50 / .510 Cal | Barrel Band
$52.00
The Black Arts Design AEA Challenger Elite Barrel Band (AKA Barrel Support Stabilizer) is designed to increase POI consistency and eliminate barrel droop. The split design allows install without removal of the factory muzzle break. Two large channels are built into the barrel band to accept TPU (a rubberized plastic) bushings. These bushings give way just enough to permit an easy install while still providing a tight fit and provide dampening characteristics. The three M3 screws provide a secure fitment. ***Fits only the .45, .50, and .510 caliber Challenger Elite***
For the .35 caliber, please click on the following link:
https://www.thepelletshop.com/products/challenger-elite-barrel-band?_pos=2&_psq=elite&_ss=e&_v=1.0
Material
Carbon Fiber filled PETG – PETG selected for low shrinkage, resistance to heat, and high dimensional accuracy. The addition of carbon fiber increases flexural modulus (stiffness) well above standard PETG and further increases dimensional accuracy.
TPU – A rubberized plastic with dampening characteristics.
Features
Robust design built for strength and stiffness.
Two internal TPU (rubberized plastic) bushings are built into the barrel section. These bushings function as dampeners and provide an uncompromised fit.
Our split design allows installation without removing the muzzle break.
The cap head screws are secured using a captive nut for a clean appearance.
Bolstered ridge along circumference of Barrel Band increases flexural modulus (stiffness) and aesthetic appeal.
Installation Instructions: https://blackartsdesign.com/aea-challenger-elite-barrel-band-install/
Saber Tactical
Saber Tactical | DELRIN BUSHING FOR TRS CLAMP ST0040
$4.75
$5.00
This bushing goes inside the TRS clamp allowing you to better stabilize the FX carbon fiber sleeve. This does not include the clamp.
Features:
Made of black delrin.Recommended with 800mm Carbon Fiber tension kits
Saber Tactical
Fx Panthera Front Bottle Adapter ST0056
$28.49
$29.99
The Saber Tactical Fx Panthera Front Bottle Adapter is designed for convenience. It allows you to attach a second bottle of compressed air to the front of your rifle, providing a really nice alternate placement option for your bottles. The adapter is constructed with stainless steel for durability and attaches easily to the front of your rifle, allowing both bottles to work in tandem for extended shooting sessions. Upgrade your shooting experience with the Saber Tactical Fx Panthera Front Bottle Adapter.
ERGO Air
ERGO AIR | TACTICAL DELUXE | GRIP PLUG
$5.29
Designed to plug the cavity on the bottom of our Tactical Deluxe Grips. Securely press fits into the bottom and helps prevent debris from lodging in the cavity of the grip. It also functions as a shock-absorbing pad to protect the grip when setting the rifle down on hard surfaces.
This plug fits-ERGO AIR | TACTICAL DELUXE FLAT TOP | SUREGRIP-ERGO AIR | TACTICAL DELUXE GRIP | SUREGRIP
ERGO Air
ERGO AIR | TACTICAL DELUXE FLAT TOP | SUREGRIP
$39.99
Features hand filling palm swells for both left and right handed shooters. The gripping surface consists of soft, textured SUREGRIP for a comfortable & secure grip in any condition.
Does Not include a plug - A Tactical Deluxe plug can be purchased here
EDgun
EDgun | Leshiy 2 | Magazine
from $89.99
Leshiy 2 Magazine
Leshiy 2 OEM magazine
8 round
comes with a retention magnet
aluminum (.35 Cal is Titanium)
PTFE coated for smooth operation
magazine holder sold separately
AirMarksman
AirMarksman | FX IMPACT Backbone Rail
$269.99
The Backbone Rail from AirMarksman is more than just an extended optics rail. The Backbone Rail has been designed to tie your entire rifle together and eliminate tolerance stacking by replacing both the factory optics rail as well as the factory backbone plate with one piece of extra rigid aircraft-grade aluminum. The AirMarksman Backbone Rail drastically reduces flex in the entire rifle, creating a more anchored and consistent shooting platform at the cost of only 4 added ounces to the total weight of the rifle. On top of stiffening the FX Impact platform, the Backbone Rail features a full 18 inches of Picatinny optics rail, the most useable rail space of any rail system on the market, with 30 MOA of elevation milled into the rail. Based on input from top NRL Airgun Class shooters, AirMarksman also added a bolt retention detent to the Backbone rail that keeps the cocking handle and bolt probe held in the rear position when it is opened. This feature prevents accidental double feeds and removes play in the cocking handle. The bolt retention detent can easily be removed during the installation process if shooters are looking to maintain the factory cocking handle feel. 100% made in the USA, the AirMarksman Backbone Rail System is the ultimate precision top rail for the FX Impact Platform. AirMarksman BackBone Rail Specs
MADE IN THE USA
Material: Aircraft Grade Aluminum
Weight: Short: 1.0 lbsMedium: 1.2 lbs Long: 1.4 lbs
Added weight to FX Impact M3: Adds only 4 ounces over factory weight.
Rail Space: Short: 8.5 InchesMedium: 14 Inches Long: 18 Inches
Added Rail Elevation: 30 MOA
All installation hardware is included with the Backbone Rail
Saber Tactical
Saber Tactical Tank Valve (ST0031)
$189.99
$199.99
Saber Tactical Tank Valve (ST0031)
Saber Tactical presents its long awaited tank valve with big over sized knobs for easy filling and a carry handle for the easy transport!
Features:
-7/8-14 Threads-2.7 Inch Gauge-2.25 Inch Valve Knob-1.12 Inch Air release knob-Carry Handle-Quick Disconnect dead head to test tank pressure
Saber Tactical
FX IMPACT COMPACT ARCA RAIL ST0023
$142.49
$149.99
This compact arca swiss rail is great for the FX Impact with the short 300cc bottle. Makes the gun very comfortable to shoot off hand and allows you to attach your favorite shooting accessories such as a flashlight or laser pointer.
Features:
Aluminum 6061 T6
Hard black anodized
Arca swiss rail with picatinny at the end
1/4 x 20 threads for common photography tripod adapter
FX Airguns
FX Panthera Hunter/Double Air Adapter Kit
$24.99
This kit allows you to add an additional bottle on your FX Panthera / Hunter
Saber Tactical
FX MAVERICK TRS RAIL
from $227.99
$239.99
Saber Tactical Top Tail Support (TRS)
Features:
Integrated bubble level in the rear allowing you to quickly check to make sure your gun is level. A must have for long range shooting.
M-Lok slots allowing you to attach varied accessories such as; flashlight, laser and weights.
Built in 20 MOA, giving your scope more elevation for long range shooting.
Has a Delrin shroud clamp to prevent shroud droop. It minimizes or eliminates any point of impact changes when switching suppressors.
Weight = .8 lb
Note* Highly recommend pairing with the Maverick Cheek riser ST0046
Black Arts Design
Air Venturi Avenger Barrel Band
$40.00
The Gen2 Black Arts Design Barrel Band System is designed to reduce the POI shifts inherent in the Air Venturi Avenger and tighten its groups. We developed a 2-component system that removes the main problem, the factory barrel band. The Air Venturi Avenger factory barrel band ties the forend of the stock directly to the barrel. Any pressure applied to the forend is fed directly to the barrel via the factory barrel band. Our 2-component system divorces the forend and lower air tube from the barrel. This is accomplished through our Forend Bracket which secures the forend to ONLY the lower air tube. The Forend Bracket does not contact the upper air tube or barrel shroud. This ends the intimate relationship between the stock forend and barrel. Our Barrel Band then ties ONLY the upper air tube and barrel providing stability. These 2 components will tighten groups and drastically reduce the seemingly random POI shifts. We highly recommend the DonnyFL Avenger Extender 1/2×20 Adapter be paired with our 2 component Barrel Band System.
Material
Carbon Filled (CF) PETG – CF PETG selected for low shrinkage, resistance to heat, and high dimensional accuracy. The addition of carbon fibers increases flexural modulus (stiffness) well above standard PETG.
TPU (thermoplastic Polyurethane). TPU is extremely flexible and highly resistant to abrasion.
Features
The shroud section houses two TPU bushings to ensure a snug fit while allowing ease of installation.
TPU has rubber like characteristics adding dampening qualities to our barrel band.
No grub screws! The lower section clamps securely with a single M3 alloy steel screw and nut. The nut is held captive within an internal slot providing a secure hold while maintaining a clean appearance.
Bolstered design along the circumference increases flexural modulus (stiffness) and aesthetic appeal.
Installation Instructions Gen2: https://blackartsdesign.com/avenger-gen2-barrel-band-system-installation/
Installation Instructions (systems sold prior to 04/08/22): https://blackartsdesign.com/air-venturi-avenger-barrel-band-system-install/
Saber Tactical
Panthera Rail - ST0057
$308.75
$325.00
Panthera Rail - ST0057
PRODUCT DESCRIPTION
Our Saber Tactical Panthera rail has already proven itself in competition helping our shooters bring home the gold in PRS competitions. It adds the rigidity and weight needed to shoot accurately in different positions.
Features:
The main body is made of lightweight T6 aluminum.
Removable brass inserts for added weight
Mlok slots on the side allow shooters to add more weight to their setup
Allows you to use a 300cc bottle when the middle brass weight is removed. Will require Panthera front bottle adapter ST0056.
Jimping pattern underneath the rail to help grip shooting bags
Wider than the factory rail
Length = 17.71 in, Width = 1.96 in
Weight = 4 pounds
Add an extra pound of weight with our brass bridge ST0059