DonnyFL
DonnyFL | GREAT KAMI Moderator
$270.74
$284.99
When we first released the Emperor, we never thought there would be a demand for something longer. But now with the .72 cal Zeus on the market, the Great Kami is born.
The baffles are thicker compared to the Emperor to withstand the constant powerful air blast, yet it only weighs 2 more ounces than the Emperor.
Features:
6061 T6 Aluminum
Black anodized
Weighs 1.2 lbs
.72 cal is threaded M23x1 specific for the AEA Zeus .72 CAL
.72 cal threaded with M18x1 is specific for AEA Element Max .58 cal
.45/50 is threaded M18x1
The Zeus .58 cal needs a Great Kami Insert with the .72 cal M23x1 thread. For this insert, please reach out to us directly.
DISCLAIMER: The products on DonnyFL are INTENDED for the use on airguns only. It is a violation of Federal law to use this product in a manner inconsistent for which it was intended for. It is your Responsibility to know the laws in your country, state, county and city and to fully comply with them.
DonnyFL
AEA | Challenger Series | .22/.25/.30 & .357 Moderator Adapters | #A81 & #A83
$37.99
$39.99
Adapters are threaded for attaching a moderator
*DOES NOT WORK WITH THE 32" CHALLENGER STANDARD OR BULLPUP. THE 32" DOES NOT HAVE A SHROUD AND A 1/2x20 UNF MODERATOR CAN BE SCREWED DIRECTLY ON WITHOUT A ADAPTER*
Features:
Made by CNC for accuracy
Material is 6061 T6 Aluminum
Black anodize
Comes with knurled thread protector
For .30 caliber measure the OD of the threaded part of the front cap. It should be close to 28mm. May need to heat up the front cap with a heat gun or mini torch to loosen the thread locker.
Saber Tactical
FX IMPACT LOW PROFILE 3 FULL ARCA SWISS RAIL
from $147.24
$154.99
***Also works for the Impact m4***
For those that do not need picatinny slots at the end of their rail, this one has full arca. Ideal for the 580cc and 700cc bottles.
Features:
MLok slots at the bottom and on both sides of the rail for add-on accessories.
Low profile, hugs closer to the bottle
Sling QD slots on both sides
6061 T6 Alluminum
Black anodize
From start of trigger guard until the end of rail is 15.75 inches x 2.75 inches wide
Includes an extended dust fill cap
DonnyFL
Muzzle Brake Air Stripper Insert Kit #M58
$23.75
$25.00
Upgrade kit for your fatboy muzzle brake. Comes with two air strippers for each size.
Note* Not compatible with the gold limited edition muzzle brakes.
Features:
.177/22, .22/25 and .25/30
Bronze anodize
Delrin tool to install air strippers
DonnyFL
Epoch Moderator Adapter #A112
$37.99
$39.99
Product description
If you decide not to use the factory Skout moderator, use this adapter to allow you to screw on a different moderator with M18X1 threads.
Features:
6061 Aluminum
Black anodize
Knurled thread protector
Made for the .357 caliber Skout
Saber Tactical
Saber Tactical | Tank Bag ST0036
$189.99
$199.99
The Saber Tactical Tank Bags are here, designed to accommodate your 9.0L tank with ease.
Key Features:
Spacious Design: Large enough to fit a 9.0L tank with a maximum 23-inch circumference and 23-inch length (29 inches with valve together).
Durable Material: Now available in a sleek grey color, offering improved aesthetics and durability.
Increased Diameter: The tank bags have been upgraded with an additional inch in diameter to make it easier to remove larger air supplies.
Accessory Pockets: Includes two large pockets for accessories, ensuring you have everything you need in one place.
Customization: Features a long velcro strip for attaching patches.
Molle Webbing: Equipped with molle webbing to attach your other molle-compatible accessories.
Clear ID Slot: Includes a clear slot for your ID card for easy identification.
Important Note: The iconic green Saber Tactical Tank Bags have been officially retired and are no longer available for purchase. The new grey tank bags not only offer a modernized look but also come with enhanced functionality to meet the evolving needs of airgun enthusiasts.
Important Information:
Intended Use: The products on Saber Tactical are intended for use on airguns and airgun accessories only. Using this product in a manner inconsistent with its intended purpose violates federal law.
Saber Tactical
MONO-POD FIELD VERSION ST0027
$142.49
$149.99
If your gun already has the Saber Tactical buttstock or you plan to get one, this mono-pod is a great addition for field use. Even if the the shooting surface is not perfectly fat, the ball joint easily adjust to it.
Features:
Stainless Steel Precision lead screw allowing for smooth micro adjustments
Other metals are aluminum 6061 T6
Rubber bottom for extra grip
No need to loosen knobs before making adjustments
Includes adapter to attach to buttstock
Detach and attach mono-pod to adapter by sliding the mono-pod in.
Strong magnets help keep it secure
Ball joint near the base allowing you to cant
DonnyFL
DonnyFL | Yokozuna Spare Extender
$28.50
$30.00
Customize the size of your Yokozuna or replace sections of your unit with these individual parts. Please note I would not add more than 2 extra baffles on top of the factory units. If you plan to do so, I would recommend going one caliber size up.
*The products on DonnyFL are INTENDED for use on airguns only. It is a violation of Federal law to use this product in a manner inconsistent with what it was intended for.
DonnyFL
DonnyFL | Yokozuna Spare Baffles
$28.50
$30.00
Customize the size of your Yokozuna or replace sections of your unit with these individual parts. Please note I would not add more than 2 extra baffles on top of the factory units. If you plan to do so, I would recommend going one caliber size up.
*The products on DonnyFL are INTENDED for use on airguns only. It is a violation of Federal law to use this product in a manner inconsistent with what it was intended for.
DonnyFL
DonnyFL | RYU Spare Baffles
$28.50
$30.00
Customize the size of your RYU or replace sections of your unit with these individual parts. Please note I would not add more than 2 extra baffles on top of the factory units. If you plan to do so, I would recommend going one caliber size up.
*The products on DonnyFL are INTENDED for use on airguns only. It is a violation of Federal law to use this product in a manner inconsistent with what it was intended for.
DonnyFL
DonnyFL | SHOGUN Moderator
$175.74
$184.99
If you thought Sumo was quiet wait until you hear Shogun. Shogun is just like Sumo but 1.5 inches longer. Donny added an additional 1 inch chamber as well as increase the first expansion chamber by .5 inches and the chamber by the exit hole another .5 inches. This design is very effective.
1.6 x 8 inches
Available in .25 and .30 calibers
Available in 1/2x20 UNF, FX(20mm) & Vulcan Thread by request.
Mono-core design to increase accuracy and limit the chances of pellet clipping
No moving parts or epoxy that may become lose after 1000's of rounds
Precision CNC'd by professional machinist
Sand blasted and anodized for maximum durability
Take apart in less than 10 seconds by unscrewing the rear end cap and pushing back the mono-core. No silly hex key or torch needed when you want to perform maintenance inside the unit.
Customizable, you can further dampen the sound by wrapping the interior tube with different sound absorbing materials.
Comes pre-wrapped in felt
Machined grooves on the outside for easy handling.
*Note: If you see white lines on the inside of the front cap, that's ok. Those were caused by the prongs holding the pieces while anodizing. They are not pellet clippings.
Note: We recommend ordering 1 caliber size up to eliminate the chance of pellet clippingDISCLAIMER: The products on DonnyFL are INTENDED for the use on airguns only. It is a violation of Federal law to use this product in a manner inconsistent for which it was intended for. It is your Responsibility to know the laws in your country, state, county and city and to fully comply with them.
Saber Tactical
Saber Tactical | Extension Rail For Tactical FX King Chassis
$142.50
$150.00
If you have our Tactical Chassis for your FX King/Dynamic/Panthera and also have a 700cc bottle, this rail will extend to almost the full length. This gives you more Arca rail on the bottom as well as more MLok slots on the sides. Available in bronze and grey.
DonnyFL
Umarex Hammer M18x1 #A60 Moderator Adapter
$37.99
$39.99
Adapters are threaded for attaching a moderator
Thread: M18 x 1
This adapter replaces the factory shroud baffle and has M18x1 threads. Comes with thread protector
DOES NOT WORK WITH THE HAMMER CARBINE MODEL
Instructions:
remove the factory shroud by grabbing onto the shroud by the front cap. When you turn the shroud counter clockwise, that should loosen the front cap. The shroud is free floating, there are no threads in it. Important thing is to remove the front cap.
once shroud is off, put a few drops of red loctite onto the barrel thread.
put the shroud back on
now take new shroud adapter and tighten onto barrel. Let it dry for a few minutes
remove thread protector on shroud adapter to screw on an airgun suppressor with M18x1 threads.
DonnyFL
Benjamin Marauder (Mrod) | Fortitude | Armada Moderator Adapter #A7
$37.99
$39.99
Adapters are threaded for attaching a moderator
Thread: 1/2 x 20 UNF
Marauders are great entry level PCP guns. Lots of mods you can do to make them more powerful. More power means a louder gun. To make it backyard friendly make sure to grab this 1/2 x 20 UNF Adapter to allow you to screw on an aftermarket LDC. Threaded end that goes into the OEM shroud is 13/16 - 28.
*Make sure to use a suppressor one caliber size up. Works really well and reduces the chance of pellet clipping.
Features:
Made by CNC for accuracy
Material is 6061 T6 Aluminum
Black anodize
Diamond pattern knurling for easy grip
DonnyFL
Extended Quick Disconnect 1/8 BSP #M20
$18.99
$19.99
This extended quick disconnect (QD) makes it easy for those guns with hard to reach fill nipples. A must have for FX Impacts.
1/8 BSP male threads
Max 5000 psi (Do not exceed recommended pressure)
Release collar close to 1.20 inches long
Comes with sealed washer