DonnyFL
Hatsan QE Moderator Adapter A24
$42.74
$44.99
Adapters are threaded for attaching a moderator
Thread: 1/2 x 20 UNF
Please note: I highly suggest getting a suppressor one size up from what your gun is. For example if you have a .25, get a .30. If you have a .30, the .30 cal suppressor is fine. This is to minimize the chance of the gun clipping.
Also if you have a Hatsan Bully .25/.30, based on customer's feedback I would go with the Emperor.
*We have not had any success with customers using a suppressor on Hatsan's line up of semi auto guns. It causes the gun to not index properly.
Features:
Matte black Anodized
CNC
Includes knurled thread protector
Compatible up to .30
Compatible with the following guns:
Hatsan GladiusHatsan Flash Wood QEHatsan AirMaxHatsan Bullboss QEHatsan BT65 QEHatsan Nova QEHatsan AT44-10 QEHatsan Hercules QEHatsan Flashpup QEHatsan AT P1Hatsan Flash QE
Saber Tactical
Extended Dust Cap Cover ST0019
$9.49
$9.99
This extended dust cap makes it easier to get into those tight trigger guards. With this dust cap, you can easily remove without straining your finger muscles!
Features:
Made of aluminum 60601 with a strong magnet inside
Measures: 14mm outer diameter and just shy of 23mm long
Saber Tactical
FX IMPACT | Cheek Riser ST0001
$61.74
$64.99
Easy to install cheek riser for the FX Impact. Reuses the factory cheek rest.
Features
6061 Aluminum
Matte Anodized
Stainless Steel screws
Saber Tactical
FX MAVERICK / WILDCAT | Cheek Riser ST0046
$47.49
$49.99
Features:
Cheek riser is made of delrin with Aluminum mounting plate
Allows a little over 18mm of vertical adjustment.
Ambidextrous for left and right hand shooters
Weight = 3.6oz
Note* Highly recommend pairing with the standard/compact FX Maverick TRS rail
DonnyFL
Hatsan Blitz M18 X 1 Adapter A117
$37.99
$39.99
This adapter allows you to screw on an airgun suppressor with M18x1 threads.
***New Improved For More Air Flow.***
I recommend going with the Ronin with this gun. I have it installed on my personal gun and it works flawlessly. However, results may vary and might need modification to work in semi auto mode. This gun is similar to the Bullmaster and others have been able to fix the issue by replacing the spring. Go to your hardware store and look for a lighter spring. I got mine from Ace hardware and it fixed the magazine indexing issue.
Features:
Compatible up to .30 caliber
Made by CNC for accuracy
Material is 6061 T6 Aluminum
Black anodize
Diamond pattern knurling for easy grip
Saber Tactical
Saber Tactical | 34MM BOTTLE CLAMP ST0005
$56.99
$59.99
Product description
If you're uneasy about drilling into your factory gun stock, this 34mm tube clamp will easily attach to your 34mm air reservoir. It has rubber pads on the inside to prevent any marring to your bottle. This clamp has picatinny rails at the bottom for you to connect your preferred picatinny accessories.
Features:
6061 T6 aluminum
Matte black anodize
Compatible with:
FX Wildcat
FX Dreamlime "Tube"
FX Streamline
Taipan Veteran
Benjamin Marauder
Saber Tactical
Panthera Rail - ST0057
$308.75
$325.00
Panthera Rail - ST0057
PRODUCT DESCRIPTION
Our Saber Tactical Panthera rail has already proven itself in competition helping our shooters bring home the gold in PRS competitions. It adds the rigidity and weight needed to shoot accurately in different positions.
Features:
The main body is made of lightweight T6 aluminum.
Removable brass inserts for added weight
Mlok slots on the side allow shooters to add more weight to their setup
Allows you to use a 300cc bottle when the middle brass weight is removed. Will require Panthera front bottle adapter ST0056.
Jimping pattern underneath the rail to help grip shooting bags
Wider than the factory rail
Length = 17.71 in, Width = 1.96 in
Weight = 4 pounds
Add an extra pound of weight with our brass bridge ST0059
Saber Tactical
Panthera Brass Bridge - ST0059
$118.75
$125.00
PRODUCT DESCRIPTION
Add an additional pound of weight with our brass bridge. Only compatible with our Saber Panthera rail since ours is wider than factory rail.
Features:
MLok slots on top allowing you to attach different accessories.
Weight: 1 lb
Saber Tactical
Saber Tactical Rail Weight V2 ST0062
$114.00
$120.00
Looking to improve your performance for competition shooting? The MLOK weights with brass inserts are the solution you've been seeking! Designed to balance your gun, these weights are crafted from high-quality 304 steel, ensuring a durable and sturdy construction that will last you many competitions to come.The MLOK weights feature brass inserts which help to redistribute the weight of your gun, creating a more balanced and stable shooting experience. The electro-plating finish adds an extra layer of protection to resist wear and tear, ensuring your MLOK weights stay in top condition for longer.MLOK weights with brass inserts are easy to install and compatible with most MLOK rails, making them a versatile addition to any shooting setup.
Features a striking gun metal gray color with a mirror finish, complemented by brass insertsSet of 2
Saber Tactical
Saber Tactical | RAW HM1000 Chassis - ST0058
$332.50
$350.00
Note: Does not include rear buttstock. if you have the wooden version, you'll need to source one.
The Saber Tactical Raw HM1000 chassis is the perfect upgrade for your air rifle. Made from high-quality 6061 aluminum, this chassis is both lightweight and durable, giving you the perfect balance of strength and maneuverability.
The MLOK slots on the side and bottom of the rail allow you to attach your favorite accessories, making customization easy and effective. Whether you're looking to add a flashlight, bipod, or anything in between, the MLOK slots give you the versatility to get the job done right.
Starting from the trigger guard, you'll have about 15.25 inches of arca rail below allowing you to position a bipod further out. Additionally, the 1/4-20 threads on the bottom of the chassis allow for easy attachment to a camera tripod adapter.
Finally, the quick disconnect holes located on both sides of the chassis make it easy to attach a sling, adding an additional layer of comfort and convenience to your shooting experience.
Overall, the Saber Tactical Raw HM1000 chassis is the perfect upgrade for anyone looking to take their air rifle performance to the next level. So why wait? Order yours today and get ready to take on the competition with confidence and style!
Saber Tactical
Saber Tactical | FX Crown Chassis | ST0021
$570.00
$600.00
***THE NEW VERSION HAS A GAP THAT WILL NOT ALLOW FOR THE MAGNET ON THE FOLDING STOCK TO ENGAGE DUE TO THE DESIGN OF THE M-LOK RAIL***
Features:
Arca Swiss rail with a short Picatinny rail in front.
Arca Swiss rail with M Lok mounts.
Foldable stock magnetically secured.
Built-in detachable bag rider.
Adjustable cheek rest.
Our very popular adjustable buttstock.
QD sling mount holes are integrated into the stock on both sides.
Weighs about 6lbs.
Saber Tactical
Fx Panthera | Drop-down Front Bottle Adapter | ST0060
$56.99
$59.99
The new Saber Tactical adapter allows a bottle to be attached to the front end of the Panthera while continuing to use either the stock Panthera Rail or the Saber Tactical Panthera Rail.
PRODUCT FEATURES
- 7.6oz in weight- Made of 304 Stainless Steele with electroplating
DonnyFL
DonnyFL | YOKOZUNA Moderator
$190.00
$200.00
FEATURES:• Indexed locking system for consistent position and no point of impact changes.• Quick detachment for easy storage and reattachment for shooting.• Comes with a 1/2 x 20 female (barrel/shroud) thread adapter.• Modular design for length adjustment.• Crafted from 6061 T6 aluminum (individual sections) and 7075 aluminum (main QD housing andadapter).
•YOKOZUNA: has the same outer diameter as our Sumo 40.46mm or 1.6
Note: We recommend ordering 1 caliber size up to eliminate the chance of pellet clippingDISCLAIMER: The products on DonnyFL are INTENDED for the use on airguns only. It is a violation of Federal law to use this product in a manner inconsistent for which it was intended for. It is your Responsibility to know the laws in your country, state, county and city and to fully comply with them.
DonnyFL
Hatsan Jet 1 & Jet 2 Adapter | A111
$37.99
$39.99
Features:
Any gun that needs a double-sided male adapter
Has through holes in the threads for easy tightening or loosening
Matte Black Anodize threads
.655 inches / 16.6 mm OD
DonnyFL
DonnyFL | RYU Moderator
$175.74
$184.99
FEATURES:• Indexed locking system for consistent position and no point of impact changes.• Quick detachment for easy storage and reattachment for shooting.• Comes with a 1/2 x 20 female (barrel/shroud) thread adapter.• Modular design for length adjustment.• Crafted from 6061 T6 aluminum (individual sections) and 7075 aluminum (main QD housing andadapter).• Quick disconnect rear available for the following moderators.(EMPEROR,SUMO,RONIN,SHOGUN,FX,TANTO,TATSU,KOI,FATBOY)
The RYU has the same diameter as our KOI at 30.48mm or 1.2 inches.
Note: We recommend ordering 1 caliber size up to eliminate the chance of pellet clippingDISCLAIMER: The products on DonnyFL are INTENDED for the use on airguns only. It is a violation of Federal law to use this product in a manner inconsistent for which it was intended for. It is your Responsibility to know the laws in your country, state, county and city and to fully comply with them.