JSB
JSB | Exact Jumbo Monster Grand
$13.06
$13.75
Product Specifications:
.22 cal
28.55 Grain
150 pellets per tin
5.52 diameter
Pellet Shape: Domed
SKU: 546488-150
NOTE: All sales on ammo are final.
JSB
JSB | Match Diabolo KnockOut Slugs MK3 | .177
$18.99
$19.99
Product Specifications:
.177 Cal
10.03 grain
500 count tin
4.51 diameter
deeper nose, skirt flare
NOTE: All sales on ammo are final.
JSB
JSB Match Diabolo HADES | .177 Cal | 10.34 Grains | 500 Ct
$16.62
$17.49
Manufacturer: JSB
Caliber: .177 cal
Ammo Type: Pellets
Ammo Weight: 10.34 gr
Pellet Shape: Hollowpoint
Pellet Quantity: 500
SKU: 546292-500
NOTE: All sales on ammo are final.
FX Airguns
FX Magazines | FX Impact | Side-Shot Magazine
$62.99
$69.99
M3 (GLOSSY MATERIAL STYLE) Will fit and work with all current M4s as well.
FITS: FX Impact
.177 Cal - 38 Rounds
.22 Cal - 28 Rounds
.25 Cal - 25 Rounds
.30 Cal - 21 Rounds
.35 Cal - 18 Rounds
DonnyFL
DonnyFL | TANTO Moderator
$94.99
$99.99
Features:
1.22 x 5 inches
Available in .22/.25 and .30
Mono-core design
Precision CNC’ed by professional machinist
Sand blasted and anodized for maximum durability
Swappable rear end caps for 1/2 x 20 Bolt, FX (M20x1) Bolt or 1/2 x 20 Cone
Comes pre-wrapped in felt
Machined grooves on the outside for easy handling
Tanto with cone endcap is 5.37 inches
Weight:
1. With 1/2 x 20 Bolt rear end cap: 3.9 oz2. With 1/2 x 20 Cone rear end cap: 4.1 oz3. With M20x1 Bolt rear end cap: 3.5 oz*Note: If you see white lines on the inside of the front cap, that's ok. Those were caused by the prongs holding the pieces while anodizing. They are not pellet clippings.Note: We recommend ordering 1 caliber size up to eliminate the chance of pellet clippingDISCLAIMER: The products on DonnyFL are INTENDED for the use on airguns only. It is a violation of Federal law to use this product in a manner inconsistent for which it was intended for. It is your Responsibility to know the laws in your country, state, county and city and to fully comply with them.
DonnyFL
AEA | HP & SF Series | Moderator Adapter #A77
$37.99
$39.99
Adapters are threaded for attaching a moderator
Thread: 1/2 x 20 UNF
Works on AEA HP/SF models & HP SS MAX .30 CAL ONLY
Features:
6061 Aluminum
1/2 x 20 male threads
Black Anodized
DonnyFL
AEA | Terminator M18x1 Big Bore Adapter #A64
$37.99
$39.99
Adapters are threaded for attaching a moderator
Thread: M18 x 1
Works on AEA TERMINATOR models.
You may need to heat up the front cap to loosen the epoxy. Then unscrew from gun.
Saber Tactical
Saber Tactical | 60MM ARCA RAIL BOTTLE CLAMP | ST0074
$66.49
$69.99
This 60mm bottle clamp will easily attach to your 60mm carbon fiber or aluminum bottles. It has rubber pads on the inside to prevent any marring to your bottle.
This clamp has a 2-inch arca rail at the bottom for you to connect your preferred arca accessories.
Features:
6061 T6 aluminum
Matte black anodize
Compatible with:
FX Carbon Fiber & Steel BottlesRAW (HM1000X, etc)Daystate (Redwolf, Airwolf, etc)Brocock (Commander, Bantam, etc)
DonnyFL
Benjamin Marauder Pistol (Prod) & Daystate Huntsman Regal Moderator Adapter #A17
$37.99
$39.99
Adapters are threaded for attaching a moderator
Thread: 1/2 x 20 UNF
Want to make your Prod quieter? You'll need this 1/2 x 20 adapter that will screw into the OEM shroud. The threads that screws into the shroud is 11/16 - 24.
The .25 Sumo 1/2 x 20 is my favorite suppressor for this gun. The .25 works great with the .22 and reduces the chance of pellet clipping. However, in order to fill this gun with the Sumo, you'll have to remove the suppressor. An alternative is to go with either the Tanto or KOI with cone rear cap.
*Highly recommend going with a caliber one size up to reduce the chance of pellet clipping.
Features:
Made by CNC for accuracy
Material is 6061 T6 Aluminum
Black anodize
Diamond pattern knurling for easy grip
DonnyFL
DonnyFL | RONIN Moderator
$175.74
$184.99
Ronin is big and bold, but it looks great even on compact bullpups. "Maybe a little overkill for the .177 and .22 but it looks so damn awesome!" - Donny
Available in .25/.30 and .357 (Big Bore) calibers
2 x 6.5 inches
1/2 x 20 UNF, FX(20mm) & Vulcan thread by request.
Mono-core design to increase accuracy and limit the chances of pellet clipping
No moving parts or epoxy that may become lose after 1000's of rounds
Precision CNC'd by professional machinist
Sand blasted and anodized for maximum durability
Take apart in less than 10 seconds by unscrewing the rear end cap and pushing back the mono-core. No silly hex key or torch needed when you want to perform maintenance inside the unit.
Customizable, you can further dampen the sound by wrapping the interior tube with different sound absorbing materials.
Comes pre-wrapped in felt
Machined grooves on the outside for easy handling.
*Note: If you see white lines on the inside of the front cap, that's ok. Those were caused by the prongs holding the pieces while anodizing. They are not pellet clippings.
Note: We recommend ordering 1 caliber size up to eliminate the chance of pellet clippingDISCLAIMER: The products on DonnyFL are INTENDED for the use on airguns only. It is a violation of Federal law to use this product in a manner inconsistent for which it was intended for. It is your Responsibility to know the laws in your country, state, county and city and to fully comply with them.
DonnyFL
DonnyFL | TATSU Moderator
$123.49
$129.99
Tatsu or "Dragon" will be a great addition for shooters who need to take the bark out of their gun yet keep the overall length short. This is a smaller version of the popular Sumo. Features:
1.6 x 4.25
Available in .22/.25 and .30
Mono-core design to increase accuracy and limit the chances of pellet clipping
No moving parts or epoxy that may become loose after 1000's of rounds
Precision CNC'd by professional machinist
Sand blasted and anodized for maximum durability
Take apart in less than 10 seconds by unscrewing the rear end cap and pushing back the mono-core. No silly hex key or torch needed when you want to perform maintenance inside the unit.
Customizable, you can further dampen the sound by wrapping the interior tube with different sound absorbing materials.
Comes pre-wrapped in felt
Machined grooves on the outside for easy handling.
Weight 4.1 oz
*Note: If you see white lines on the inside of the front cap, that's ok. Those were caused by the prongs holding the pieces while anodizing. They are not pellet clippings.Note: We recommend ordering 1 caliber size up to eliminate the chance of pellet clippingDISCLAIMER: The products on DonnyFL are INTENDED for the use on airguns only. It is a violation of Federal law to use this product in a manner inconsistent for which it was intended for. It is your Responsibility to know the laws in your country, state, county and city and to fully comply with them.
DonnyFL
FX/DonnyFL Moderator
$113.99
$119.99
This is a custom size that comes with your FX guns if you decide to upgrade the suppressor. Same length as the Tanto but larger in diameter. The outer diameter is comparable to the FX factory suppressor.
Features:
1.36 x 5 inches
Available in .25 & 30
Note: We recommend ordering 1 caliber size up to eliminate the chance of pellet clippingDISCLAIMER: The products on DonnyFL are INTENDED for the use on airguns only. It is a violation of Federal law to use this product in a manner inconsistent for which it was intended for. It is your Responsibility to know the laws in your country, state, county and city and to fully comply with them.
We don't recommend using this with the FX Panthera or FX Panthera Hunter.
DonnyFL
DonnyFL | KOI Moderator
$137.74
$144.99
With a new rugged front cap design, signature DonnyFL body grooves and bolt endcap, the KOI is a great addition to any shrouded or un-shrouded air rifle. This model has the smallest outer diameter compared to the other DonnyFL models but don’t let the size fool you. With the added vent holes around the front, it is as impressive as the others.
Features:
Available in .22/.25 and .30
Mono-core design
Precision CNC’ed by professional machinist
Sand blasted and anodized for maximum durability
Swappable rear end caps for 1/2 x 20 Bolt, FX (M20x1) Bolt or 1/2 x 20 Cone
Comes pre-wrapped in felt
Machined grooves on the outside for easy handling
Weight:
1. With 1/2 x 20 Bolt rear end cap: 4.7 oz2. With 1/2 x 20 Cone rear end cap: 5.0 oz3. With M20x1 Bolt rear end cap: 4.6 oz4. With M14x1.25 Bolt rear end cap: 4.6 oz*Note: If you see white lines on the inside of the front cap, that's ok. Those were caused by the prongs holding the pieces while anodizing. They are not pellet clippings.
Note: We recommend ordering 1 caliber size up to eliminate the chance of pellet clippingDISCLAIMER: The products on DonnyFL are INTENDED for the use on airguns only. It is a violation of Federal law to use this product in a manner inconsistent for which it was intended for. It is your Responsibility to know the laws in your country, state, county and city and to fully comply with them.
DonnyFL
DonnyFL | EMPEROR V3 Moderator
$227.99
$239.99
This Emperor is for the serious high powered airgunner. This version has a mono-core design and allows you to screw on an optional 6.5 inch extender to make it even quieter.
Features:
compatible with .22, .25, .30, .308, .457 and .50 caliber
Please note: does not come with adapter, please look in our adapter section for the specific adapter for your air rifle.
Endcaps for 1/2 x 20 UNF, M18x1 (big bore), M20x1 (FX Impact/Wildcat)
Precision CNC'd
Comes pre-wrapped in felt and stainless steel mesh
Machined grooves on the outside for easy handling.
Made with 6061 Aluminum, will not work for firearms. Please read disclaimer.
*Note: If you see white lines on the inside of the front cap, that's ok. Those were caused by the prongs holding the pieces while anodizing. They are not pellet clippings.
Note: We recommend ordering 1 caliber size up to eliminate the chance of pellet clippingDISCLAIMER: The products on DonnyFL are INTENDED for the use on airguns only. It is a violation of Federal law to use this product in a manner inconsistent for which it was intended for. It is your Responsibility to know the laws in your country, state, county and city and to fully comply with them.
DonnyFL
Benjamin Bulldog .357 Cal Moderator Adapter w/ thread protector #A41
$42.74
$44.99
Adapters are threaded for attaching a moderator
Thread: M18 x 1
The new adapter have finally arrived. This new design goes back to the barrel and slides over the barrel bushing. This will keep the barrel aligned with the adapter's exit hole. Please note that the barrel bushing is not included.
The .357 Benjamin Bulldog is becoming popular for big game hunting. Add this adapter and pair it up with a .357 Ronin or .357 Emperor to make it the ultimate hunting airgun.
The factory gun already has the barrel bushing. I took mime off to show how it fits into the adapter in the picture.
Made by CNC for accuracy
Very easy to install. Remove the top and bottom screw securing the front cap and swap it out for this adapter. Screw the two screws back in and you're done. No need to remove the shroud.
Matte Black anodize
Knurled thread protector
When putting this on, press the adapter into the shroud as you tighten the two screws. This will ensure the adapter is flush with the shroud.