DonnyFL
AEA | Element 1/2 x 20 Adapter | #A93
$37.99
$39.99
This adapter fits factory carbon fiber shroud allowing you to screw on an airgun suppressor with 1/2 x 20 threads.
Features:
6061 Aluminum T6
Black Anodized
Knurled thread protector
DonnyFL
Air Venturi Avenger Extender/Umarex Origin 1/2 x 20 Adapter #A70
$42.74
$44.99
Adapters are threaded for attaching a moderator
Thread: 1/2 x 20 UNF**DOES NOT FIT ANY OF THE AVENGER X SERIES GUNS**
This version allows you to use a larger suppressor than the Tanto or KOI without having to remove it to fill the gun. Also redesigned to slide over the barrel to keep the barrel centered with the adapter. This reduces the chance of pellet clipping and improves accuracy.
Features:
Compatible with .177 caliber to .25
6061 Aluminum T6
Black anodized
1/2 x 20 male threads
*Make sure to use a suppressor one caliber size up. Works really well and reduces the chance of pellet clipping.
DonnyFL
DonnyFL | EMPEROR V3/RONIN 6.26 EXTENDER
$56.99
$59.99
Is the 10.5 inch Emperor v3 still too loud for you? If so add this 6.25 inch expansion chamber to the rear of the Emperor to make it even quieter. This increases the air volume that gets captured inside the suppressor. Works with the latest version of the Ronin as well. If it has the grooves in the front cap, it's the latest model.
*Note: If you see white lines on the inside of the front cap, that's ok. Those were caused by the prongs holding the pieces while anodizing. They are not pellet clippings.
DISCLAIMER: The products on DonnyFL are INTENDED for the use on airguns only. It is a violation of Federal law to use this product in a manner inconsistent for which it was intended for. It is your Responsibility to know the laws in your country, state, county and city and to fully comply with them.
Saber Tactical
Saber Tactical | Fx Impact Fishing Kit | ST0051
$213.74
$224.99
The Saber Tactical FX Impact Fishing Conversion Kit is a must-have accessory for serious air rifle enthusiasts. Designed specifically for the Fx Impact PCP air rifle, this conversion kit allows you to transform your air rifle into a powerful fishing tool.
With its ease of use and versatility, the FX Impact Fishing Conversion Kit is the perfect accessory for anyone who loves air rifles and fishing. Be sure to check out the Saber Tactical FX Impact Fishing Conversion Kit today!
Saber Tactical
Saber Tactical | 60MM BOTTLE CLAMP ST0004
$66.49
$69.99
If you're uneasy about drilling into your factory gun stock, this 60mm bottle clamp will easily attach to your 60mm carbon fiber or aluminum bottles. Has rubber pads on the inside to prevent any marring to your bottle.
This clamp has picatinny rails at the bottom for you to connect your preferred picatinny accessories.
Features:
6061 T6 aluminum
Matte black anodize
Compatible with:
FX Carbon Fiber & Steel BottlesRAW (HM1000X, etc)Daystate (Redwolf, Airwolf, etc)Brocock (Commander, Bantam, etc)AEA HP Carbines (With Carbon Fiber Tanks)
DonnyFL
DonnyFL | FATBOY 2.0 Moderator
$166.25
$175.00
Features:
Compatible with .177 to .30 calibers
Includes 3 interchangeable air strippers
Redesigned 1/2 x 20 rear cap for easy gripping
Can be used with our 6.25 inch extender for more hush power
Measure 4.25 inches long by 2 inches in diameter
Weighs only 6.7 oz
DonnyFL
Benjamin Marauder Pistol (Prod) Extended Adapter #A78
$42.74
$44.99
Adapters are threaded for attaching a moderator
Thread: 1/2 x 20 UNF
This adapter extends the shroud 1.5 inches or about 38.1mm. Pair it up with a .22-25 Tanto 1/2 x 20 Bolt #S69 and this pistol will be very quiet. No need to remove the suppressor to fill the gun.
Features:
6061 Aluminum
Black anodized
Comes with knurled thread protector
Saber Tactical
MONO-POD BENCH VERSION ST0026
$237.49
$249.99
If your gun already has the Saber Tactical buttstock or you plan to get one, this mono-pod is a great addition to it for bench competition. Very rigid and making horizontal/vertical adjustments is butter smooth!
Features:
Stainless Steel Precision lead screw allowing for smooth micro adjustments
Other metals are aluminum 6061 T6
Rubber bottom for extra grip
No need to loosen knobs before making adjustments
Includes adapter to attach to buttstock
Detach and attach mono-pod to adapter by sliding the mono-pod in.
Strong magnets help keep it secure
Ball joint near the base allowing you to cant
DonnyFL
Stainless Steel Extended Quick Disconnect w/ Foster Fitting M32
$23.74
$24.99
This extended quick disconnect (QD) makes it easy for those guns with hard to reach fill nipples. A must have for FX Impacts.
1/8 BSP male threads
Max 5000 psi (Do not exceed recommended pressure)
Release collar close to 1.20 inches long
Comes with sealed washer
DonnyFL
EDGun | M14x1.25 To 1/2 x 20 Barrel Adapter A98
from $21.85
$23.00
Adapters are threaded for attaching a moderator
Thread: M14x1.25 to 1/2 x 20 UNF
This adapter is about 22mm OD x 38.30mm Length. It converts barrel threads from M14x1.25 to 1/2 x 20.
Works on EDgun Leshiy 2 (use with aluminum handguard to mount on bigger moderators)
Silver Does not come with a thread protector.
Features:
6061 T6 Aluminum
Silver (no anodize)
Saber Tactical
FX IMPACT ARCA RAIL 2 ST0022
$151.99
$159.99
Similar to the first Arca Rail, however this one has T slots on the both sides allowing you to attach shooting accessories such as flashlight and laser. Edges are very smooth and makes it very comfortable to shoot offhand.
Features:
Aluminum 6061 T6
Hard black anodize
Arca Swiss Rail underneath with Picatinny at the end
Also has 1/4 x 20 threads for common camera tripod attachment
Includes an extended dust fill cap
DonnyFL
Hatsan Bullmaster | Invader | Galatian 1/2 x 20 Moderator Adapter #A35
$37.99
$39.99
#A35 Adapter
1/2 x 20 UNF adapter for those rapid firing Bullmaster. New and improve design to allow more air flow.
Please note that when you add a suppressor to this gun, it does not properly index the magazine. It uses blowback air to advance the magazine however with a suppressor on, it over rotates and causes it to not properly index. If you plan to single load it'll work fine. Some customers have been able to get the gun to work properly by swapping out the spring inside the shroud with a different strength one. Will take trial an error.
Similar to the Blitz, this guy may need a lighter spring to work with a suppressor. I got mine from Ace hardware. See picture
Features:
Compatible up to .30 caliber
Made by CNC for accuracy
Material is 6061 T6 Aluminum
Black anodize
Diamond pattern knurling for easy grip
Saber Tactical
FX IMPACT COMPACT ARCA RAIL ST0023
$142.49
$149.99
This compact arca swiss rail is great for the FX Impact with the short 300cc bottle. Makes the gun very comfortable to shoot off hand and allows you to attach your favorite shooting accessories such as a flashlight or laser pointer.
Features:
Aluminum 6061 T6
Hard black anodized
Arca swiss rail with picatinny at the end
1/4 x 20 threads for common photography tripod adapter
DonnyFL
DonnyFL | FATBOY 2.0 Muzzle Brake
$28.49
$29.99
This muzzle brake or air stripper screws onto the front of the fat boy.
Note: This unit does not come with the individual air strippers. You can change the caliber size by using the inserts that was included with the fat boy.
Features:
Made of aluminum 6061 T6
Black anodize
Weights 2.9 oz
Add the optional 3 inch extender for the Fatboy to make it quieter!EXTENDER!
Saber Tactical
FX IMPACT | EXTENDED PICATINNY RAIL ST0006
$142.49
$149.99
Do you need to extend the picatinny rail further on the Impact? Then this is the perfect add-on. Very sturdy and hardly any flex, also comes with an extended dust cap for your convenience.