Accu-Shot
Accu-Tac
AEA
AEA Precision Airguns
Air Venturi
AirForce
AirMaks Arms
Airmarksman
Alkin
Arken Optics
Athlon Optics
Black Arts Design
Brocock
CRC Precision
DonnyFL
Eagle Vision
EDgun
Element Optics
ERGO Air
Field Optics Research
FX
FX Airguns
FX Outdoots
GRS
H&N
Hatsan
Holosun
huben
Integrix
JSB
JTS Airguns
Karma Airguns
LCS Air Arms
Leapers
Lothar Walther
Mr Hollowpoint
Nielsen Specialty Ammo
Niksan Defence
Optisan Optics
Patriot Outdoors
PCP Kong
Predator
Rapid Air Worx
Saber Tactical
ShipTection
Skout Airguns
The Pellet Shop
UTG
Warne
Western Airguns
ZAN
Zero Compromise Optic
Leapers
UTG PRO P.O.I | 2 PCs High Profile | PICATINNY Rings
$55.95
$64.99
ITEM NUMBER : RDU013022
•
Proudly Designed and Made in USA
•
High Profile Precision Optics Interface (P.O.I®) Scope Rings Have a 37mm Center Height to Fit 30mm Tube Optics with up to a 73mm Outer Objective Diameter
•
The innovative Precision Optics Interface (P.O.I®) Addresses 3 of the Most Critical Areas in Scope Rings -a) Progressively Machined and Precise Inner Diameter to Achieve a Seamless Interface Between the Scope Ring and Tubeb) Torx Screw Locking Side Plate Controlled by Dual Spring Loaded Guide Rods Precisely Clenches Dovetail Rail for a Secure and Repeatable Zero Holdc) Removable Threaded Recoil Stop-pin Provides an Additional Interface Point with the Dovetail Rail for Added Security Against Bidirectional Recoil
•
Original Snag-free Contoured Profile with Reduced Weight and Size
•
6061-T6 Aircraft Aluminum and Steel Construction with a Matte Black Finish
•
2 Piece Ring Set, Each Equipped with 4 Top Torx Screws, Mounts onto Most Dovetail Rails
Leapers
UTG PRO P.O.I | 2 PCs Medium Profile | DOVETAIL Rings
$55.95
$64.99
•
Proudly Designed and Made in USA
•
Medium Profile Precision Optics Interface (P.O.I®) Scope Rings Have a 30mm Center Height to Fit 30mm Tube Optics with up to a 59mm Outer Objective Diameter
•
The innovative Precision Optics Interface (P.O.I®) Addresses 3 of the Most Critical Areas in Scope Rings -a) Progressively Machined and Precise Inner Diameter to Achieve a Seamless Interface Between the Scope Ring and Tubeb) Torx Screw Locking Side Plate Controlled by Dual Spring Loaded Guide Rods Precisely Clenches Dovetail Rail for a Secure and Repeatable Zero Holdc) Removable Threaded Recoil Stop-pin Provides an Additional Interface Point with the Dovetail Rail for Added Security Against Bidirectional Recoil
•
Original Snag-free Contoured Profile with Reduced Weight and Size
•
6061-T6 Aircraft Aluminum and Steel Construction with a Matte Black Finish
•
2 Piece Ring Set, Each Equipped with 4 Top Torx Screws, Mounts onto Most Dovetail Rails
Leapers
UTG PRO P.O.I | 2 PCs Medium Profile | PICATINNY Rings
$55.95
$64.99
Proudly Designed and Made in USA
•
Medium Profile P.O.I® (Precision Optics Interface) Rings Have a 30mm Center Height to Fit Optics with a 30mm Tube and up to a 59mm Outer Objective
•
The Innovative P.O.I® (Precision Optics Interface) Addresses 3 of the Most Critical Areas in Scope Rings -a) Progressively Machined for a Precise Inner Ring Surface to Achieve a Seamless Ring-to-Scope Interactionb) Low Profile and Flush-fitting Locking Side Plate Controlled by Dual Spring Loaded Guide Rods Interfacing with the Rail with Torx Screw Locking to Ensure Secure and Repeatable Zero Holdc) Square-shaped Integral Recoil Stop Interfacing with a Picatinny Slot via Complete Surface Contact to Eliminate the Possibility of Forward and Aft Movement from Recoil Vibrations
•
2 Piece Ring Set, Each Equipped with 4 Top Torx Screws and Designed with a 22mm Ring Width
•
Designed to Fit on Mil-spec 1913 Picatinny Rail Platforms
•
Machined from 6061-T6 Aluminum Alloy and 4605 Steel with Matte Black Hard Coat Anodize
•
UTG PRO® Original Snag-free Contoured Profile with Reduced Weight and Size
UTG
UTG PRO | AR15 6-POSITION RECEIVER EXTENSION TUBE | MIL-SPEC
$17.99
Part Number: TLU001
• 6-position Mil-spec Diameter Receiver Extension Tube for AR15 Rifles• Extension Tube CNC Machined from 6061-T6 Aircraft Grade Aluminum with Precisely Rolled Threads for Durable Thread Engagement with Lower Receiver• Underwent the Tightest Tolerance Controls for a Secure Fit and Function with Various Collapsible Stocks• Finished in a Matte Black Type III Class II Hard Coat Anodize• Proudly Designed and Made in USA
HEIGHT (IN)
1.5
HEIGHT (MM)
36.8
LENGTH (IN)
7.3
LENGTH (MM)
184.2
WIDTH (IN)
1.1
WIDTH (MM)
27.94
UTG
UTG PRO | AR15 OPS READY S1 MIL-SPEC STOCK ONLY
$34.50
Part Number: RBUS1BMS
Proudly Designed and Made in USA
Built for Heavy-duty Operations with Tightest Tolerance Control Providing the Most Secure Fit and Silent Operation
Mil-spec Stock Molded from Impact Resistant High-strength Polymer in Black
Built-in Rubberized Butt Pad, Chamfered Front and Rear Edges and Slanted Cheek Rest Surface Further Enhances Shooting Stability and Consistent Firearm Control
Dual Storage Compartments with Removable Waterproof Caps Provide Dry Storage for Batteries (Up to 8 CR123) and/or Other Essential Accessories
Integral Ambidextrous Sling Loop and QD Sling Swivel Housing for Left or Right Handed Shooters
Extended 8" Length for Increased Length of Pull - Combine with our Super Slim Handguards for Superior Firearm Handling
Polymer Stock Only
HEIGHT (IN)
5.5
LENGTH (IN)
8.5
LENGTH (MM)
215.9
WIDTH (IN)
2.3
UTG
UTG PRO | Keymod Picatinny Rail Section
$13.95
$14.95
• Proudly Designed and Made in USA• Innovative Rail Edge Design Providing True Continuous Rail Slots When Connecting Multiple Rail Sections• Precision Machined from Aircraft Grade Aluminum Alloy with Anodizing• Includes Required Keymod Compatible Steel Locking Nuts, Steel Allen Screws and Allen Wrench for InstallationItem Number-8 Slot: MTURS04M-4 Slot: MTURS04S
UTG
UTG Recon 360 TL Bipod | Picatinny
$73.99
$89.99
UTG Recon 360 TL Bipod
Features:
•
3 Position Folding Legs and Lockable Leg Extensions Equipped with Nonslip Rubberized Foot Pads
•
Center Height Adjustable from 5.5"-7" | 7"-9" | 8"-12"
•
Fine-tunable Tension Adjustment Lever Applies the User Desired Amount of Tension to the Bipod's 360° Panning & 15° Forward, Rearward, Left, and Right Tilt
•
Low Profile Offset Picatinny Mount with Knurled Thumb Nut and Reinforced Steel Cross Bolt
•
Durable Aircraft Aluminum Construction Finished in a Matte Black Anodization
UTG
UTG | .22/Airgun to Picatinny/Weaver Low Pro Snap-in Adaptor Mount
$12.99
•
.22/Airgun Dovetail to Picatinny/Weaver Rail Adaptor
•
Innovative Rail Platform to Convert Most .22/Airgun Rails
•
Top Slot with Spring Tension Retraction/Expansion Design to Snap into Picatinny/Weaver Base
•
Extremely Low Profile and Lightweight
•
Precision and Repeatable Alignment
•
Easy Installation with Most .22/Airgun Rails, 2PCs/Set
•
Removable Stop Pin for Extra Secure Installation
UTG
UTG | Dovetail to Picatinny/Weaver Rail Adaptor Mount
$14.99
$15.99
• Matte Black Anodized 6061-T6 Aluminum Construction
• 3.94" Scalloped 9 Slot Picatinny Rail with 0.59" Saddle Height
• Compatible with Most 9mm - 11mm Flat or Round Dovetail Rails
• Full Length Locking Side Plate for a Secure and Repeatable Zero Hold
• Optional Recoil Stop Pin Provides Additional Retention Against Bidirectional Recoil
Leapers
UTG | Gen 2 Light/Green Laser Combo with Integral Mount
$113.99
$134.68
2-In-1 tactical 2nd generation Flashlight/green laser combo with Integral mounting deck and patented QD lever lock
New flashlight circuit board design with 400 lumen power upgrade and extended 3 hour runtime
Class 3R Green Laser with Textured Rubber Push-button On/Off, Remote Pressure Switch, 1x CR2 Battery and 2x CR123A Batteries; Laser Output 2. 5~3. 1mW
Rotational laser ring to provide 10 solid locking positions for laser around the light for close -to-bore and individualized placement options
Triple-function Flashlight end cap with push-button momentary on, permanent twist on, and additional remote pressure switch operation
Product is Made in China
The Pellet Shop
UTG | Homeland Security Gun Case
from $32.00
UTG® 25" Homeland Security Gun Case• Durable 600D Polyester Construction• 21" X 10" Front Compartment with Inner MOLLE Panel Layout• 25" X 12" Padded Main Compartment with 4 User Configurable Retention Straps• Outside Features Include: D-ring Wall Hanger, Carry Handle, Adjustable Shoulder Strap, Morale Patch Panel, and Dual Lockable Zippered Closures
UTG® 38" KIS Homeland Security Keep-It-Simple Gun Case
•
Durable 600D Polyester Construction
•
Front Pouch with Hook-and-loop Closure for Storing Mags, Ammo, Cleaning Supplies, and Other Accessories
•
Front Zippered Pouch for Various Accessories
•
Clear Name Tag Holder
•
Padded Interior on Each Side of the Main Compartment Provide Maximum Protection from Dents and Scratches
•
1.5" Wide Adjustable Shoulder Strap for Hands Free Transportation
•
Durable 1.5" Wide Two-piece Carry Handle for Immediate Grab and Go
•
D-rings for Wall Hanger Storage
•
Dual #8 Heavy Duty Lockable Zippers
•
Main Compartment Size: Length 38" x Height 11"
Leapers
UTG | OP3 | 3-12X44 30MM COMPACT SCOPE
$225.99
UTG OP3 3-12X44 30MM COMPACT SCOPE, AO, IE, GLASS UMOA (OP3-GM3124UMOA)
Built on TRUE STRENGTH® Platform and Completely Sealed and Nitrogen Filled for Reliable Shockproof and Zero Holding Performance
IPX7 Waterproof Rated
30mm Tube with Best in Class Emerald Lens Coatings to Achieve Maximum Light Transmission for Best Clarity
Premium Low Top Zero Lockable and Resettable Target Turrets with Precise 1/4 MOA per Click Adjustment
UMOA Range Estimating Etched Glass Reticle
Innovative EZ-TAP® Illumination Enhancing (IE®) System with Red/Green Dual-Color and 36 Multi-Color Mode to Accommodate All Weather/Light Conditions (US Pat. 8437079; EU Pat. EP2520894)
1-Click Illumination Memory Feature Gets the User Right Back to the Color/Brightness Setting Last Used
Low Top Side Wheel Adjustable Turret (SWAT) for Parallax Adjustment from 10 Yards to Infinity
Fine Tune Adjustable/Lockable Eyepiece Diopter
Complete with Flip-open Lens Caps, 3" Removable Threaded Sunshade, Cleaning Cloth, and Medium Profile Max Strength Twist Lock Picatinny/Weaver Rings
ACCESSORIES INCLUDED
MaxStrength Picatinny/Weaver Rings, 1 Pair
3 Inch Sunshade
Flip-open Lens Caps
R2032 3V High Energy Lithium Battery
Hex Screw
Allen Wrench 3mm
Allen Wrench 1.5mm
Cleaning Cloth
User Manual
Leapers
UTG | OP3 | 4-16X44 30MM COMPACT SCOPE
$238.99
UTG OP3 4-16X44 30MM COMPACT SCOPE, AO, IE, GLASS UMOA (OP3-GM4164UMOA)
Built on TRUE STRENGTH® Platform and Completely Sealed and Nitrogen Filled for Reliable Shockproof and Zero Holding Performance
30mm Tube with Best in Class Emerald Lens Coatings to Achieve Maximum Light Transmission for Best Clarity
IPX7 Waterproof Rated
Premium Low Top Zero Lockable and Resettable Target Turrets with Precise 1/4 MOA per Click Adjustment
UMOA Range Estimating Etched Glass Reticle
Innovative EZ-TAP® Illumination Enhancing (IE®) System with Red/Green Dual-Color and 36 Multi-Color Mode to Accommodate All Weather/Light Conditions (US Pat. 8437079; EU Pat. EP2520894)
1-Click Illumination Memory Feature Gets the User Right Back to the Color/Brightness Setting Last Used
Low Top Side Wheel Adjustable Turret (SWAT) for Parallax Adjustment from 10 Yards to Infinity
Fine Tune Adjustable/Lockable Eyepiece Diopter
Complete with Flip-open Lens Caps, 3" Removable Threaded Sunshade, Cleaning Cloth, and Medium Profile Max Strength Twist Lock Picatinny/Weaver Rings
ACCESSORIES INCLUDED
MaxStrength Picatinny/Weaver Rings, 1 Pair
3 Inch Sunshade
Flip-open Lens Caps
CR2032 3V High Energy Lithium Battery
Hex Screw
Allen Wrench 3mm
Allen Wrench 1.5mm
Cleaning Cloth
User Manual
UTG
UTG | Over Bore Bipod QD Mount
$37.97
Quick Detachable Picatinny Mount for the UTG® Over Bore Bipod (TL-BPOB01-A)
Allows for Quick Transferring of the Over Bore Bipod onto other Applications Equipped with Additional QD Mounts
Tension Adjustment Knob Controls the Amount of Tension Felt when Tilting
USER MANUAL
UTG
UTG | Over Bore Bipod | 7"-11" Center Height | Picatinny
$169.99
$184.99
Quick Detachable Picatinny Base Designed to Mount onto the Top or Bottom Picatinny Rail of Handguards
•
Wide Open Angle Improves Stability
•
Matte Black Anodized Aircraft Aluminum Construction with Reinforced Steel Components
•
3 Position Folding Legs Equipped with Rubberized Foot Pads
•
Lockable and Height Adjustable Legs Providing a Center Height from 7"-11"
•
22° Panning and 44° Tension Adjustable Left and Right Tilt
•
Posi-lock Push Buttons Feature a Large Surface Area for Easier Use while Wearing Gloves
ITEM NUMBER :
TL-BPOB01-A