Accessories, Bi-Pods & Tri-Pods

Sold out

AirMaks Arms AirMaks KATRAN & KRAiT | Magazine $74.99

Self-indexing magazines for rifles series KATRAN & KRAiT. 4,5 (.177) 18 shots 5,5 (.22) 16 shots 6,35 (.25) 14 shots

Sold out

AirMaks Arms AirMaks KATRAN & KRAiT | Monopod & Bag Rider $94.99

This is a bag rider/monopod for the Airmaks KATRAN & KRAiT series rifles.

Sold out

AirMarksman AirMarksman 28mm Digital Gauge $59.99

Digital 28mm gauge with G1/8BSP threads. Reads pressure in bar. 300 Bar working max pressure. Black cover included.

Athlon Optics | Midas Carbon Fiber Tripod

Athlon Optics Athlon Optics | Midas Carbon Fiber Tripod from $649.99

TRIPOD MODEL HEAD STYLE HEAD MOUNT LEG MATERIAL MAX LEG DIA. MAX EXT. HEIGHT LOWEST EXT. HEIGHT. FOLDED HEIGHT WEIGHT MAX LOAD. AL28 Ballhead Arca Compatiable Aluminum 28 mm 65 in 17 in 27 in 4.7 lbs 26 lbs CF29 Ballhead and Leveling Head Arca Compatiable (Ballhead) 10-Layer Carbon Fiber 32 mm 65 in 9 in 26 in 5.5 lbs 33 lbs CF32 Ballhead and Leveling Head Arca Compatiable (Ballhead) 10-Layer Carbon Fiber 32 mm 65 in 9 in 26 in 5.7 lbs 55 lbs CF36 Ballhead and Leveling Head Arca Compatible (Ballhead) 10-Layer Carbon Fiber 36 mm 71 in 10 in 29 in 7.7 lbs 66 lbs CF40 Ballhead and Leveling Head Arca Compatiable (Ballhead) 10-Layer Carbon Fiber 40 mm 71 in 10 in 29 in 8.4 lbs 88 lbs

Sold out

Atlas Bipod CAL Series | BT65-LW17 (Gen 2) | Picatinny Mount | With QD

Accu-Shot Atlas Bipod CAL Series | BT65-LW17 (Gen 2) | Picatinny Mount | With QD $299.95

With American Defense Quick Disconnect The CAL (Cant And Loc) Atlas Bipods were developed for shooters that do not desire the Panning feature. The BT65-LW17 mounts directly to any 1913 style Picatinny rail via the included ADM-170-S Lever. It is comprised of 6061-T6 aluminum that is Mil-Spec Type III hard coat anodized and have heat treated stainless steel components. Available in black only. We chose to support a legend in the shooting sports by using the original KMW “Pod-Loc™.” Read how to adjust the Pod-Loc™ lever below. Height Range: 5.1 - 9.4" (6.6” at 90°) Preloaded Cant: 45 degrees Position Button 0.5" diameter 5 leg positions: 0, 45, 90, 135 & 180 degrees Non-Rotating Legs: outer leg does not rotate around inner leg Larger, stronger inner legs Weight: 14.57 ounces Footprint: 9–12.5" Designed, Engineered, Machined and Assembled in America

Sold out

Atlas Bipod PSR Series | BT46-LW17 | Picatinny Mount | With QD

Accu-Shot Atlas Bipod PSR Series | BT46-LW17 | Picatinny Mount | With QD $319.95

With American Defense Quick Disconnect The BT46-LW17 PSR (Precision Sniper Rifle) Atlas Bipod mounts directly to any 1913 style Picatinny rail via the included ADM-170-S lever. It is comprised of 6061-T6 aluminum, except the strengthened inner legs which are made from 7075-T6 aluminum that are Mil-Spec Type III hard coat anodized and have heat treated, stainless steel components. Available in black only. Selected for the SOCOM PSR (Precision Sniper Rifle) Weapons System. NSN 1005-01-663-0038 Height Range: 5.2 - 9.6" (6.8” at 90°) Preloaded Pan: 30 degrees Preloaded Cant: 30 degrees Position Button 0.5" diameter Fore and Aft pivot limiting Bosses 5 leg positions: 0, 45, 90, 135 & 180 degrees Non-Rotating Legs: outer leg does not rotate around inner leg Larger, stronger inner legs Weight: 13.61 ounces approx. Footprint: 8–11" Designed, Engineered, Machined and Assembled in America

Sold out

Atlas Bipod V8 Series | BT10 | Picatinny Mount | w/o QD

Accu-Shot Atlas Bipod V8 Series | BT10 | Picatinny Mount | w/o QD $219.95

Without Quick Disconnect The BT10 V8 Atlas Bipod mounts directly to any 1913 style Picatinny rail via a low profile two screw clamp assembly. It is comprised of 6061-T6 aluminum that is Mil-Spec Type III hard coat anodized and have heat treated stainless steel components. Available in black only. Selected for SOCOM MK14 MOD 2. NSN 1005-01-601-000 Height Range: 4.8 - 9.1" (6.3” at 90°) Preloaded Pan: 30 degrees Preloaded Cant: 30 degrees Position Button 0.36" diameter 5 leg positions: 0, 45, 90, 135 & 180 degrees Weight: 11.0 ounces approx. Footprint: 8–11" Designed, Engineered, Machined and Assembled in America

Sold out

Atlas Bipod V8 Series | BT10-LW17 | Picatinny Mount | With QD

Accu-Shot Atlas Bipod V8 Series | BT10-LW17 | Picatinny Mount | With QD $279.95

With American Defense Quick Disconnect The BT10-LW17 V8 Atlas Bipod mounts directly to any 1913 style Picatinny rail via the included ADM-170-S lever. It is comprised of 6061-T6 aluminum that is Mil-Spec Type III hard coat anodized and have heat treated stainless steel components. Available in black only. NSN 1005-01-623-6257 Height Range: 5.2 - 9.6" (6.8” at 90°) Preloaded Pan: 30 degrees Preloaded Cant: 30 degrees Position Button 0.36" diameter 5 leg positions: 0, 45, 90, 135 & 180 degrees Weight: 12.7 ounces approx. Footprint: 8–11" Designed, Engineered, Machined and Assembled in America

Benjamin Bulldog .357 Cal Moderator Adapter w/ thread protector #A41

DonnyFL Benjamin Bulldog .357 Cal Moderator Adapter w/ thread protector #A41 $44.99

Adapters are threaded for attaching a moderator Thread: M18 x 1 The new adapter have finally arrived. This new design goes back to the barrel and slides over the barrel bushing. This will keep the barrel aligned with the adapter's exit hole. Please note that the barrel bushing is not included. The .357 Benjamin Bulldog is becoming popular for big game hunting. Add this adapter and pair it up with a .357 Ronin or .357 Emperor to make it the ultimate hunting airgun. The factory gun already has the barrel bushing. I took mime off to show how it fits into the adapter in the picture. Made by CNC for accuracy Very easy to install. Remove the top and bottom screw securing the front cap and swap it out for this adapter. Screw the two screws back in and you're done. No need to remove the shroud. Matte Black anodize Knurled thread protector When putting this on, press the adapter into the shroud as you tighten the two screws. This will ensure the adapter is flush with the shroud.

DonnyFL Benjamin Marauder (Mrod) | Fortitude | Armada Moderator Adapter #A7 $39.99

Adapters are threaded for attaching a moderator Thread: 1/2 x 20 UNF Marauders are great entry level PCP guns. Lots of mods you can do to make them more powerful. More power means a louder gun. To make it backyard friendly make sure to grab this 1/2 x 20 UNF Adapter to allow you to screw on an aftermarket LDC. Threaded end that goes into the OEM shroud is 13/16 - 28. *Make sure to use a suppressor one caliber size up. Works really well and reduces the chance of pellet clipping. Features: Made by CNC for accuracy Material is 6061 T6 Aluminum Black anodize Diamond pattern knurling for easy grip

DonnyFL Benjamin Marauder Pistol (Prod) & Daystate Huntsman Regal Moderator Adapter #A17 $39.99

Adapters are threaded for attaching a moderator Thread: 1/2 x 20 UNF Want to make your Prod quieter? You'll need this 1/2 x 20 adapter that will screw into the OEM shroud. The threads that screws into the shroud is 11/16 - 24. The .25 Sumo 1/2 x 20 is my favorite suppressor for this gun. The .25 works great with the .22 and reduces the chance of pellet clipping. However, in order to fill this gun with the Sumo, you'll have to remove the suppressor. An alternative is to go with either the Tanto or KOI with cone rear cap. *Highly recommend going with a caliber one size up to reduce the chance of pellet clipping. Features: Made by CNC for accuracy Material is 6061 T6 Aluminum Black anodize Diamond pattern knurling for easy grip

DonnyFL Benjamin Marauder Pistol (Prod) Extended Adapter #A78 $44.99

Adapters are threaded for attaching a moderator Thread: 1/2 x 20 UNF This adapter extends the shroud 1.5 inches or about 38.1mm. Pair it up with a .22-25 Tanto 1/2 x 20 Bolt #S69 and this pistol will be very quiet. No need to remove the suppressor to fill the gun. Features: 6061 Aluminum Black anodized Comes with knurled thread protector

Eagle Vision | FX Magazine | Dreamline | Maverick | Crown | wildcat MK3

Fits the following rifles: Dreamline (all models) Maverick Crown Bobcat MK3 Easier to load Holds pellets more securely Smoother rotation Numbered magazine shot count .22 Cal (5.5mm) – 18 shot (with magnetic lid) .25 Cal (6.35mm) – 16 shot (with magnetic lid) Maximum Pellet & slugs length 11.5mm flat head 12mm dome head please note: this magazine are designed to be load one at the time by rotate the round pellet holder in the centre you need to ~ ensure you block the hole from underneath with your finger.some caliber like 177 and 22 can remove the magnetic cover to load like new Fx magazine with short pellets. ***ALL SALES ARE FINAL ON THESE MAGS***

Eagle Vision | FX Magazine | FX Impact High Capacity Magazine

Eagle Vision Eagle Vision | FX Magazine | FX Impact High Capacity Magazine $113.99

Please note:this magazine is designed for slugs only. You may fit a pellet on them if the pellet diameter is not less than 5.70mm (we don’t guarantee). The spring’s tension is set to 2 full turns for slugs. If you are using soft lead pellet you may need to reduce attention to 1 to 1.25 of a turn. You may be unable to fit our magazines to your gun If you are using after market non standard or non factorry original part such as Brass Inlet Transfer Port . Before purchase this you need to make sure all your rifle part is original. We do not accept return if magazines get dent or scratched for that reason. This is a high capacity magazine, designed for the FX Impact platform. It is made from aluminium and cut by CNC machine. Improvements include: Magnetic cover Higher capacity Easy load Secure pellet retention Very smooth rotation Numbered shot count 22 (5.5mm) – 27 shots 25 (6.35mm) – 26 shots 30 (7.62mm) – 22 shots This package includes: 1 x 3mm Allen key6x rubber ball holder 1x waterproof storage case Please note: This product will not fit the early model FX Impacts (MK1/2) unless they have been fitted with the adapter plate to accept larger capacity magazines. ***ALL SALES ARE FINAL ON THESE MAGS***

Sold out

EDgun EDgun | EaZy Fill Trigger $149.99

The EDgun EaZy fill system is a revolutionary step forward in PCP (pre-charged Pneumatic) filling. When filling any PCP from a traditional compressed air bottle source, it requires the user to install the fill whip, open the valve, wait for the gun to fill, close the valve and bleed the air out of the fill hose. There hasn't been any advancement with how this process is done - until now. The EaZY fill has a hand throttle that acts like a commonly found compressed air chuck; squeeze the trigger, fill the gun, release the trigger and remove the probe. The filling process no longer wastes air, makes noise when bleeding off the hose, and the process is much faster. Benefits of the EaZy fill system Zero air waste Quicker than traditional valves Adaptable to any PCP fill system Quiet filing No need to access the tank valve Clean Supplied with a 1/8 BSPP (G 1/8) thread that will adapt to all fill probe sizes and foster Foster fitting attachment Hard anodizing coating

Find anything you need

Fast Shipping

Quality Control

Mounting & Sighting