AEA Precision Airguns
AEA | Magazines (Big bore 35/45/50/510 Cal)
$29.99
Fits:
-HP SS MAX (.45/.50/.510 ONLY)-Challenger Big Bore / Elite (Sidelever model)
The Pellet Shop
TPS | Pellet Savers
$1.25
The Pellet Shop Pellet Savers!Pellet savers wrap around your tin and prevent it from accidently opening while traveling. Save your pellets from unwanted damaged while you're on the road !
Saber Tactical
SABER TACTICAL | FX IMPACT M3 |TRS RAIL
from $239.99
NOT COMPATIBLE WITH THE IMPACT M4!
Saber Tactical Top Tail Support (TRS)This new rail changes an already great looking tactical gun into a jaw dropping beast! More importantly, it opens up the possibilities with the latest airgun trends. From the new top rail mounted bipod by GRS to inline night optics, and everything in between.
Features:
- Integrated bubble level in the rear allowing you to quickly check to make sure your gun is level.
-M-Lok slots allowing you to attach varied accessories such as; Flashlight, laser and weights.
-Build in 20 MOA giving your scope more elevation for long range shooting
-A Delrin shroud clamp to prevent shroud drooping. Minimizes or eliminates any point of impact changes
-Available in standard (FX Impact Standard / Sniper) and compact (FX Impact Compact) sizes with black anodize.
AirMarksman
Airmarksman Deadeye Cleaning Pull Through
$17.99
*Cleaning patches not included.
The Airmarksman Deadeye Pull Through features a kevlar braided loop that allows you to easily pull patches through your barrel without using a rod or wire brush. Easy to pack around for those moments when you need a quick barrel cleaning.
AEA Precision Airguns
AEA | Magazines (Terminator)
from $30.00
Fits:
-AEA Terminator Gen 2 ModelsPlastic Case.30 Cal - 11 Shots (CNC).35 Cal - 10 Shots
Eagle Vision
Eagle Vision | FX Magazine | FX Impact High Capacity Magazine
$113.99
Please note:this magazine is designed for slugs only. You may fit a pellet on them if the pellet diameter is not less than 5.70mm (we don’t guarantee). The spring’s tension is set to 2 full turns for slugs. If you are using soft lead pellet you may need to reduce attention to 1 to 1.25 of a turn.
You may be unable to fit our magazines to your gun If you are using after market non standard or non factorry original part such as Brass Inlet Transfer Port . Before purchase this you need to make sure all your rifle part is original. We do not accept return if magazines get dent or scratched for that reason.
This is a high capacity magazine, designed for the FX Impact platform.
It is made from aluminium and cut by CNC machine.
Improvements include:
Magnetic cover
Higher capacity
Easy load
Secure pellet retention
Very smooth rotation
Numbered shot count
22 (5.5mm) – 27 shots
25 (6.35mm) – 26 shots
30 (7.62mm) – 22 shots
This package includes:
1 x 3mm Allen key6x rubber ball holder
1x waterproof storage case
Please note:
This product will not fit the early model FX Impacts (MK1/2) unless they have been fitted with the adapter plate to accept larger capacity magazines.
***ALL SALES ARE FINAL ON THESE MAGS***
Western Airguns
Western Airguns | Sidewinder Magazine
$159.99
$179.00
Spare Removable Magazine for the Western Sidewinder. Made of solid titanium.
Capacity.22 Cal - 15 Shot.25 Cal - 15 Shot.30 Cal - 12 Shot
AEA Precision Airguns
Element MAX Rear Tank Assembly
$189.00
Rear tank upgrade for the AEA Element MAX
-300cc capacity Includes the adapter, tank and clamp assembly
*AEA no longer includes the rubber buttpad*
FX
FX Impact | STX Slug Tensioned Barrel Kit
from $349.99
*SHIPS WITH HEAVY SUPERIOR SLUG LINER
The advancement of slug shooting and the enhancements to the FX Impact have shooters wanting to use heavier slugs at faster speeds. This requires a more rigid barrel to handle the additional energy and vibrations created by these projectiles. The new FX Tensioned Barrel System adds the firmness needed to let you reach the potential of the FX Impact with heavy slugs, all while maintaining the extreme accuracy everyone expects from an FX Airgun.
Conceived and created by the famed airgun engineer Hein Frommann, who perfected it through a global collaboration with Johan & Fredrik Axelsson (Sweden), Matt Dubber & Roelf Vorster (South Africa) & Ernest Rowe (USA). The result is really showing off the brain trust at FX Airguns.
From a barrel harmonics perspective, the tensioner system reduces the amplitude of barrel movement which results in better accuracy and more consistency. Secondarily the rigidness of the barrel becomes more temperature stable and will further hold zero regardless of conditions and to handle knocks to the barrel during hunting, PRS courses, etc.
800mm Barrel
To push the boundaries of what small bore slugs can do, FX is introducing an 800mm Slug Tensioned Barrel for the FX Impact. This barrel will allow the FX Impact to shoot heavier slugs at the speeds needed to create a higher BC which will allow the Impact to shoot at further distances.
All FX Tensioned Barrels allow the shooter to use a moderator. 1/2” UNF threads come standard on all but the .35 Calibers, which use an M18x1 thread. When installing the tension nut, tighten until the nut is flush with the carbon fiber housing, then tighten an additional quarter turn. Additional torque is not needed. Note: The tensioned barrel is not really needed for those shooting pellets as pellets use less pressure and produces less movement to the barrel (except for the .35 caliber that does benefit from the tensioner).
*In order to get the advertised velocities (40gr. slugs @ 1040 fps) you will need an 800mm Impact with Power Block, 720 Power Plenum, Pin Probe & Tungsten Hammer Weight.
Black Arts Design
Element Max | Barrel Band
$49.99
AEA Element Max Barrel Band
The Black Arts Design AEA Element Max Barrel Band (AKA Barrel Support Stabilizer) is designed to increase POI consistency and eliminate barrel droop instigated by the use of large moderators. In order to provide a tight fit and provide an easy install, we built in 2 large channels to accept TPU (a rubberized plastic) bushings. These bushings give way just enough to permit an easy install while still providing a tight fit, and provide some dampening characteristics. Once snugged down the single M3 screw provides ample holding force to secure the barrel while eliminating barrel droop regardless of the moderator selected. ***Fits all calibers of the Element Max***
Material
Carbon Fiber filled PETG – PETG selected for low shrinkage, resistance to heat, and high dimensional accuracy. The addition of carbon fiber increases flexural modulus (stiffness) well above standard PETG and further increases dimensional accuracy.
TPU - A rubberized plastic with dampening characteristics.
Features
Robust design built for strength and stiffness.
2 internal TPU (rubberized plastic) bushings are built into the barrel section. These bushings act as dampeners as well as aiding in installation without compromising a tight fit to the barrel.
The cap head screw is secured using a captive nut for a clean appearance.
Bolstered ridge along circumference of Barrel Band increases flexural modulus (stiffness) and aesthetic appeal.
AEA Precision Airguns
AEA | Rail Attachment Kit
from $75.00
Rail Attachment kits for AEA Airguns.Short Rail:Fits AEA HP SS w/ 41mm Air Tube Medium Rail:Fits AEA HP Standard CE w/ 41mm Air TubeLong Rail:Fits AEA Terminator .35 cal w/ 41mm Air Tube
Made of CNC aluminum
Black Arts Design
AEA Airguns Gauge Protector
$12.00
The Black Arts Design gauge protector was designed to protect the pressure gauges on the AEA line of Airguns.
FX Airguns
FX Magazines | FX Impact | Side-Shot Magazine- Gen 4
$69.99
FX Impact Side-Shot Magazine – Gen 4
The FX Impact Side-Shot Magazine Gen 4 is meant specifically for the new FX Impact M4 Airgun. It is made of sturdy plastic and is easy to load thanks to the plastic face-plate lifting off.
SHOT COUNT
.177 – 34 rounds.22 – 28 rounds.25 – 25 rounds.30 – 20 rounds.35 – 18 rounds
FX
FX Impact | STX Barrel Kit (Smooth Twist X Superior)
from $299.99
*SHIPS WITH STX - Smooth Twist X Superior LINER*PROBE INCLUDED*MAGAZINES NOT INCLUDED
The Smooth Twist X Barrel is a fully rifled barrel liner. All barrel kits now ship with the STX Superior Liner. FX’s proprietary process of imparting the inner rifling of the barrel from the outside of the steel tubing leaves a flawlessly smooth finished rifling inside the bore. This in turn increases the accuracy of the projectile drastically and makes this a highly coveted barrel for any air gun enthusiast. These barrel kits will include the barrel, shroud & probe for the selected caliber. This barrel is housed in the Interchangeable Barrel system allowing the shooter to swap and change barrel liners of various twist rates, bore specifications and more; all to tailor the barrel to different projectile sizes. The standard barrel length is 600mm.
700mm Smooth Twist X-Barrel with Superior Liner
With the FX 700mm Smooth Twist X barrel, comes an exciting upgrade from the standard X Barrel. It is 100mm longer and provides higher accuracy due to its more efficient air consumption and stabilizing power imparted by the length of the barrel (available in both .25 and .30 caliber). The 700mm barrel can also be utilized to extract more power from the Impact for those using it in a hunting application. You can expect to gain up to 10% more muzzle energy from the barrel when tuned properly over the shorter standard 600mm X barrel.
Much like the standard FX Smooth Twist X Barrel, the 700mm barrel is housed in the FX Interchangeable liner system which allows additional barrel liners of varying twist rates and other specifications to be exchanged for different projectiles.
For those who wants to experience more power from their FX Impact or who are looking for an extra edge in their competitive shooting, we highly recommend the upgrade to the unrivaled FX 700mm Smooth Twist X Barrel.