Leapers
UTG PRO P.O.I | 2 PCs Medium Profile | DOVETAIL Rings
$55.95
$64.99
•
Proudly Designed and Made in USA
•
Medium Profile Precision Optics Interface (P.O.I®) Scope Rings Have a 30mm Center Height to Fit 30mm Tube Optics with up to a 59mm Outer Objective Diameter
•
The innovative Precision Optics Interface (P.O.I®) Addresses 3 of the Most Critical Areas in Scope Rings -a) Progressively Machined and Precise Inner Diameter to Achieve a Seamless Interface Between the Scope Ring and Tubeb) Torx Screw Locking Side Plate Controlled by Dual Spring Loaded Guide Rods Precisely Clenches Dovetail Rail for a Secure and Repeatable Zero Holdc) Removable Threaded Recoil Stop-pin Provides an Additional Interface Point with the Dovetail Rail for Added Security Against Bidirectional Recoil
•
Original Snag-free Contoured Profile with Reduced Weight and Size
•
6061-T6 Aircraft Aluminum and Steel Construction with a Matte Black Finish
•
2 Piece Ring Set, Each Equipped with 4 Top Torx Screws, Mounts onto Most Dovetail Rails
Leapers
UTG PRO P.O.I | 2 PCs Medium Profile | PICATINNY Rings
$55.95
$64.99
Proudly Designed and Made in USA
•
Medium Profile P.O.I® (Precision Optics Interface) Rings Have a 30mm Center Height to Fit Optics with a 30mm Tube and up to a 59mm Outer Objective
•
The Innovative P.O.I® (Precision Optics Interface) Addresses 3 of the Most Critical Areas in Scope Rings -a) Progressively Machined for a Precise Inner Ring Surface to Achieve a Seamless Ring-to-Scope Interactionb) Low Profile and Flush-fitting Locking Side Plate Controlled by Dual Spring Loaded Guide Rods Interfacing with the Rail with Torx Screw Locking to Ensure Secure and Repeatable Zero Holdc) Square-shaped Integral Recoil Stop Interfacing with a Picatinny Slot via Complete Surface Contact to Eliminate the Possibility of Forward and Aft Movement from Recoil Vibrations
•
2 Piece Ring Set, Each Equipped with 4 Top Torx Screws and Designed with a 22mm Ring Width
•
Designed to Fit on Mil-spec 1913 Picatinny Rail Platforms
•
Machined from 6061-T6 Aluminum Alloy and 4605 Steel with Matte Black Hard Coat Anodize
•
UTG PRO® Original Snag-free Contoured Profile with Reduced Weight and Size
UTG
UTG | .22/Airgun to Picatinny/Weaver Low Pro Snap-in Adaptor Mount
$12.99
•
.22/Airgun Dovetail to Picatinny/Weaver Rail Adaptor
•
Innovative Rail Platform to Convert Most .22/Airgun Rails
•
Top Slot with Spring Tension Retraction/Expansion Design to Snap into Picatinny/Weaver Base
•
Extremely Low Profile and Lightweight
•
Precision and Repeatable Alignment
•
Easy Installation with Most .22/Airgun Rails, 2PCs/Set
•
Removable Stop Pin for Extra Secure Installation
UTG
UTG | Dovetail to Picatinny/Weaver Rail Adaptor Mount
$14.99
$15.99
• Matte Black Anodized 6061-T6 Aluminum Construction
• 3.94" Scalloped 9 Slot Picatinny Rail with 0.59" Saddle Height
• Compatible with Most 9mm - 11mm Flat or Round Dovetail Rails
• Full Length Locking Side Plate for a Secure and Repeatable Zero Hold
• Optional Recoil Stop Pin Provides Additional Retention Against Bidirectional Recoil
Leapers
UTG | Gen 2 Light/Green Laser Combo with Integral Mount
$113.99
$134.68
2-In-1 tactical 2nd generation Flashlight/green laser combo with Integral mounting deck and patented QD lever lock
New flashlight circuit board design with 400 lumen power upgrade and extended 3 hour runtime
Class 3R Green Laser with Textured Rubber Push-button On/Off, Remote Pressure Switch, 1x CR2 Battery and 2x CR123A Batteries; Laser Output 2. 5~3. 1mW
Rotational laser ring to provide 10 solid locking positions for laser around the light for close -to-bore and individualized placement options
Triple-function Flashlight end cap with push-button momentary on, permanent twist on, and additional remote pressure switch operation
Product is Made in China
Leapers
UTG | OP3 | 3-12X44 30MM COMPACT SCOPE
$225.99
UTG OP3 3-12X44 30MM COMPACT SCOPE, AO, IE, GLASS UMOA (OP3-GM3124UMOA)
Built on TRUE STRENGTH® Platform and Completely Sealed and Nitrogen Filled for Reliable Shockproof and Zero Holding Performance
IPX7 Waterproof Rated
30mm Tube with Best in Class Emerald Lens Coatings to Achieve Maximum Light Transmission for Best Clarity
Premium Low Top Zero Lockable and Resettable Target Turrets with Precise 1/4 MOA per Click Adjustment
UMOA Range Estimating Etched Glass Reticle
Innovative EZ-TAP® Illumination Enhancing (IE®) System with Red/Green Dual-Color and 36 Multi-Color Mode to Accommodate All Weather/Light Conditions (US Pat. 8437079; EU Pat. EP2520894)
1-Click Illumination Memory Feature Gets the User Right Back to the Color/Brightness Setting Last Used
Low Top Side Wheel Adjustable Turret (SWAT) for Parallax Adjustment from 10 Yards to Infinity
Fine Tune Adjustable/Lockable Eyepiece Diopter
Complete with Flip-open Lens Caps, 3" Removable Threaded Sunshade, Cleaning Cloth, and Medium Profile Max Strength Twist Lock Picatinny/Weaver Rings
ACCESSORIES INCLUDED
MaxStrength Picatinny/Weaver Rings, 1 Pair
3 Inch Sunshade
Flip-open Lens Caps
R2032 3V High Energy Lithium Battery
Hex Screw
Allen Wrench 3mm
Allen Wrench 1.5mm
Cleaning Cloth
User Manual
Leapers
UTG | OP3 | 4-16X44 30MM COMPACT SCOPE
$238.99
UTG OP3 4-16X44 30MM COMPACT SCOPE, AO, IE, GLASS UMOA (OP3-GM4164UMOA)
Built on TRUE STRENGTH® Platform and Completely Sealed and Nitrogen Filled for Reliable Shockproof and Zero Holding Performance
30mm Tube with Best in Class Emerald Lens Coatings to Achieve Maximum Light Transmission for Best Clarity
IPX7 Waterproof Rated
Premium Low Top Zero Lockable and Resettable Target Turrets with Precise 1/4 MOA per Click Adjustment
UMOA Range Estimating Etched Glass Reticle
Innovative EZ-TAP® Illumination Enhancing (IE®) System with Red/Green Dual-Color and 36 Multi-Color Mode to Accommodate All Weather/Light Conditions (US Pat. 8437079; EU Pat. EP2520894)
1-Click Illumination Memory Feature Gets the User Right Back to the Color/Brightness Setting Last Used
Low Top Side Wheel Adjustable Turret (SWAT) for Parallax Adjustment from 10 Yards to Infinity
Fine Tune Adjustable/Lockable Eyepiece Diopter
Complete with Flip-open Lens Caps, 3" Removable Threaded Sunshade, Cleaning Cloth, and Medium Profile Max Strength Twist Lock Picatinny/Weaver Rings
ACCESSORIES INCLUDED
MaxStrength Picatinny/Weaver Rings, 1 Pair
3 Inch Sunshade
Flip-open Lens Caps
CR2032 3V High Energy Lithium Battery
Hex Screw
Allen Wrench 3mm
Allen Wrench 1.5mm
Cleaning Cloth
User Manual
UTG
UTG | Over Bore Bipod QD Mount
$37.97
Quick Detachable Picatinny Mount for the UTG® Over Bore Bipod (TL-BPOB01-A)
Allows for Quick Transferring of the Over Bore Bipod onto other Applications Equipped with Additional QD Mounts
Tension Adjustment Knob Controls the Amount of Tension Felt when Tilting
USER MANUAL
Warne
Warne Extended Skeletonized MSR Mount | 20 MOA
from $124.99
The LR-SKEL Mount offers 20 MOA built-in slope for long range precision shooting. This allows additional elevation adjustment in your optic when shooting ranges over 600 yards. The LR-SKEL Mount is CNC precision machined from 6061 aluminum and we've been able to reduce the weight by over 30%, compared to our R.A.M.P. Mount by utilizing a skeletonized body and ring caps. The LR-SKEL provides an additional inch of forward cantilever, compared to the original SKEL Mount to provide proper eye relief when using scopes with large eye boxes and gives extra space behind the mount for accessories like the Warne A645 45° side mount adapter.
Warne
Warne Gen 2 Extended Skeletonized MSR Mount | 0 MOA
from $124.99
Stylish 1 piece Cantilever MSR mount Designed to have the "Ideal Height" for Modern Sporting Rifles, the XSKEL places the optic at the proper height and forward position on AR platforms. Skeletonized design along with steel hardware and threaded inserts provides a lightweight and rigid mounting platform. This Gen II Edition has all the features you need.The XSKEL Mount offers a lightweight scope mounting solution for your MSR style firearm with the same durable, return to zero reputation that you've come to expect from Warne. This mount is CNC precision machined from 6061 aluminum and we've been able to reduce the weight by utilizing a skeletonized body and ring caps. The XSKEL provides 2 inches of forward cantilever and a 1 piece side clamp design for additional strength. The extra cantilever provides proper eye relief when using scopes with large eye boxes and will give extra space behind the mount for accessories like the Warne A645 45? side mount adapter.
A Warne gen 2 extended MSR mount from Warne Scope Mounts equips you for target accuracy
Warne
Warne Quick Detach MSR Mount | 0 MOA
from $175.00
Warne's 1 piece QD XSKEL cantilever mount features Patent Pending Dual Quick Detach levers and is constructed from 6061 T6 aluminum for a lightweight and rigid foundation. Steel threaded inserts ensure steel on steel contact between all threaded interfaces, and MSR Ideal Height helps the shooter maintain a proper cheek weld and shooting position with any optic on flat top guns. The QDXSKEL gives you a generous forward cantilever for modern scopes while reducing weight with its skeletonized design, and the Return-to-Zero performance that Warne is known for.
Zero Compromise Optic
ZCO | 36mm Scope Rings
$225.00
The ZCO ring mounts have been specially developed for professional mounting of ZCO riflescopes and are characterized by high strength and precision. The ring mounts are available in heights of 30mm (1.18 inches) and 34mm (1.34 inches).
Our ring mounts are made in Austria and are manufactured on state-of-the-art CNC milling machines. The mounts are made of Anodized coated EN AW-7075 aluminum.
ZCO 36mm Rings Medium-High Specs
Ring Width | 0.87 inches (22mm)Mounting Height | 1.34 inches (34mm)Total Height | 2.44 inches (62mm)Weight | 2.86 oz (81g)
Data SheetManual
Zero Compromise Optic
ZCO | Block Scope Mount
$395.00
The ZCO block mount with 0Mil / 6Mil incline has been specially developed for professional mounting of ZCO riflescopes and is characterized by high precision and strength. Our mounts are made in Austria and are manufactured on state-of-the-art CNC milling machines. The mounts are made of Anodized coated EN AW-7075 aluminum.
This scope mount includes a folding bubble level which can be mounted on the left or right side, a special bushing for mounting a mirage band over the barrel, a leveling wedge for the rifle scope, and all required Torx bit inserts.
ZCO Block Mount Specs
Length | 5.12 inches (130mm)Ring Width | 1.18 inches (30mm)Mounting Height | 1.50 inches (38mm)Total Height | 2.60 inches (66mm)Weight | 10.37 oz (294g)Incline | 20.6 MOAData SheetManual
Zero Compromise Optic
ZCO | Slimline Scope Mount
$315.00
The ZCO Slim-Line mount with 6Mil pre-tilt was specially developed for professional mounting of ZCO riflescopes and provides very high strength despite its lightweight design.
Our mounts are made in Austria and are manufactured on state-of-the-art CNC milling machines. The mounts are made of Anodized coated EN AW-7075 aluminum.
The Slim Line mount includes a leveling wedge for the optic to achieve horizontal alignment of the scope on the scope base, without the use of a feeler gauge or plumb bob. Likewise, a folding bubble level can be placed on the mount.
ZCO Slimline Mount Specs
Length | 4.41 inches (112mm)Ring Width | 0.87 inches (22mm)Mounting Height | 1.18 inches (30mm)Total Height | 2.28 inches (58mm)Weight | 5.9 oz (168g)Incline | 20.6 MOA (6 Mil)DatasheetManual
Zero Compromise Optic
ZCO | Sunshade
from $68.00
Sunshade ø50mm / ø56mm
Reduction in loss of contrast in diffused, glare and backlight conditions
protection of the riflescope front optics
made of high-quality aerospace aluminum
available with black anodized surface or in Cerakote FDE