[title]
[message]
DonnyFL
Benjamin Marauder Pistol (Prod) & Daystate Huntsman Regal Moderator Adapter #A17
$39.99
Adapters are threaded for attaching a moderator
Thread:Â 1/2 x 20 UNF
Want to make your Prod quieter? You'll need this 1/2 x 20 adapter that will screw into the OEM shroud. The threads that screws into the shroud is 11/16 -Â 24.Â
The .25 Sumo 1/2 x 20 is my favorite suppressor for this gun. The .25 works great with the .22 and reduces the chance of pellet clipping. However, in order to fill this gun with the Sumo, you'll have to remove the suppressor. An alternative is to go with either the Tanto or KOI with cone rear cap.
*Highly recommend going with a caliber one size up to reduce the chance of pellet clipping.
Features:Â
Made by CNC for accuracy
Material is 6061 T6 Aluminum
Black anodize
Diamond pattern knurling for easy grip
DonnyFL
EDGun | M14x1.25 To 1/2 x 20 Barrel Adapter A98
from $23.00
Adapters are threaded for attaching a moderator
Thread: M14x1.25 to 1/2 x 20 UNF
This adapter is about 22mm OD x 38.30mm Length. It converts barrel threads from M14x1.25 to 1/2 x 20.Â
Works on EDgun Leshiy 2 (use with aluminum handguard to mount on bigger moderators)
Silver Does not come with a thread protector.Â
Features:
6061 T6 Aluminum
Silver (no anodize)
DonnyFL
Benjamin Marauder Pistol (Prod) Extended Adapter #A78
$44.99
Adapters are threaded for attaching a moderator
Thread:Â 1/2 x 20 UNF
This adapter extends the shroud 1.5 inches or about 38.1mm. Pair it up with a .22-25 Tanto 1/2 x 20 Bolt #S69Â and this pistol will be very quiet. No need to remove the suppressor to fill the gun.
Features:
6061 Aluminum
Black anodized
Comes with knurled thread protector
DonnyFL
Hatsan Bullmaster | Invader | Galatian 1/2 x 20 Moderator Adapter #A35
$39.99
#A35 Adapter
1/2 x 20 UNF adapter for those rapid firing Bullmaster. New and improve design to allow more air flow.
Please note that when you add a suppressor to this gun, it does not properly index the magazine. It uses blowback air to advance the magazine however with a suppressor on, it over rotates and causes it to not properly index. If you plan to single load it'll work fine. Some customers have been able to get the gun to work properly by swapping out the spring inside the shroud with a different strength one. Will take trial an error.
Similar to the Blitz, this guy may need a lighter spring to work with a suppressor. I got mine from Ace hardware. See picture
Features:Â
Compatible up to .30 caliber
Made by CNC for accuracy
Material is 6061 T6 Aluminum
Black anodize
Diamond pattern knurling for easy grip
Â
Saber Tactical
Fx Panthera Front Bottle Adapter ST0056
$29.99
The Saber Tactical Fx Panthera Front Bottle Adapter is designed for convenience. It allows you to attach a second bottle of compressed air to the front of your rifle, providing a really nice alternate placement option for your bottles. The adapter is constructed with stainless steel for durability and attaches easily to the front of your rifle, allowing both bottles to work in tandem for extended shooting sessions. Upgrade your shooting experience with the Saber Tactical Fx Panthera Front Bottle Adapter.
DonnyFL
Sam Yang .50 cal Dragon Claw A47
$50.00
Product description
Sam Yangs are known to output some crazy power. This adapter with M18x1 threads will allow you to screw on the Emperor v3. You might have need the Extender as well if Silence is a Priority!
DonnyFL
Skout | Epoch Moderator Adapter #A108
$39.99
If you prefer not to use the factory Skout moderator, you can use this adapter to allow it to screw on a different moderator with 1/2 x 20 threads.
Features:
6061 Aluminum
Black anodize
Knurled thread protector
Compatible up to .30 caliber
DonnyFL
DonnyFL | END CAP/QD ADAPTER
from $20.00
FEATURES:
Rear caps for existing moderators
M71 = Sumo/Tatsu/Shogun QD rear cap with 1/2 x 20M72 = Ronin/Emperor/ Fat Boy QD rear cap with 1/2 x 20M73 = KOI/Tanto QD rear cap with 1/2 x 20M74 = FX/DonnyFL QD rear cap with 1/2 x 20M86 - Ronin/Emperor QD rear cap with M18x1
M87=Â FX/DonnyFL QD rear cap with M18x1
QD AdaptersM75 = QD barrel adapter M14x1.25M76 = QD barrel adapter M18x1M77 = QD barrel adapter M20x1M78 = QD barrel adapter 1/2 x 20
Product details:
Indexed so it locks on at same position every time
Made of 7075 aluminum
Grey anodized
Includes barrel/shroud adapter and rear cap
Select the barrel thread specific to your airgun
DISCLAIMER: The products on DonnyFL are INTENDED for the use on airguns only.  It is a violation of Federal law to use this product in a manner inconsistent for which it was intended for. It is your Responsibility to know the laws in your country, state, county and city and to fully comply with them.Compatibility: Will not work on old moderators with the flat front cap.
DonnyFL
Crosman 2240 Adapter | A30
$39.99
This is a slide on adapter for the Crosman 2240, ID measures 7/16.
DonnyFL
Epoch Moderator Adapter #A112
$39.99
Product description
If you decide not to use the factory Skout moderator, use this adapter to allow you to screw on a different moderator with M18X1 threads.
Features:
6061 Aluminum
Black anodize
Knurled thread protector
Made for the .357 caliber Skout
DonnyFL
Huben GK1 Pistol Adapter | A116
$34.99
Product description
This adapter allows you to add a 1/2 x 20 moderator or muzzle brake to your Huben GK1 Pistol.
Features:
6061 T6 Aluminum
Black Anodize
Knurled thread protector
DonnyFL
Western Airguns | Sidewinder Adapter | A109
$59.99
Product description
Â
Experience the Ultimate Shooting Upgrade with the Western Airguns Sidewinder Adapter by DonnyFL!
Elevate your airgun game to new heights with our innovative Sidewinder Adapter, designed to give you the perfect fusion of performance, compatibility, and durability. Experience unmatched shooting prowess as you pair your favorite silencers or moderators with high-powered air rifles like never before.
Product Features:
Exclusive Pre-Production Offer:Â Be the first to test out this cutting-edge technology with our special pre-production, non-anodized version of the Sidewinder adapter.
Unparalleled Durability:Â Crafted from high-quality 6061 aluminum, ensuring long-lasting performance and reliability.
Wide Compatibility:Â Designed for .22 to .30 caliber airguns, making it a versatile and indispensable addition to your shooting arsenal.
Exceptional Performance:Â Experience improved accuracy and noise reduction with seamless integration of your favorite silencers or moderators.
Note:Â Not compatible with the Rattler model.
Don't miss this limited-time opportunity to upgrade your airgun performance with the Western Airguns Sidewinder Adapter from DonnyFL
DonnyFL
JTS | Aircuda & Aircuda MAX Adapter | A115
$49.99
Product description
Elevate your shooting experience with the DonnyFL JTS Aircuda and Aircuda MAX Adapter. Expertly crafted to let you seamlessly attach a DonnyFL Moderator to your rifle, this adapter ensures you can shoot with enhanced precision and reduced noise.
Key Features:
Compatibility:Â Perfect fit for JTS Aircuda and Aircuda MAX rifles. Suitable for .22, .25, .30 caliber variants.
Premium Material:Â Made with high-grade 6061 aluminum, ensuring durability and a lightweight feel.
Because this adapter was made to fit both the Standard and Max versions of the AirCuda, and because of the variations between individual rifles, you may find that one or two threads remain exposed when you snug the adapter in place. This is normal, and will not effect the performance of the rifle. In fact, our testing has revealed that a longer or heavier moderator can be used with less risk of clipping as compared to the endcap-only style adapter. It was necessary to design in this flexibility to overcome the challenges of this airgun's shroud design so that moderators can be used.
DonnyFL
Extended Quick Disconnect 1/8 BSP #M20
$19.99
This extended quick disconnect (QD) makes it easy for those guns with hard to reach fill nipples. A must have for FX Impacts.
1/8 BSP male threads
Max 5000 psi (Do not exceed recommended pressure)
Release collar close to 1.20 inches long
Comes with sealed washer
DonnyFL
Stainless Steel Extended Quick Disconnect w/ Foster Fitting M32
$24.99
This extended quick disconnect (QD) makes it easy for those guns with hard to reach fill nipples. A must have for FX Impacts.
1/8 BSP male threads
Max 5000 psi (Do not exceed recommended pressure)
Release collar close to 1.20 inches long
Comes with sealed washer