EDgun | Leshiy 2 Air tank | 350CC / 300 bar carbon fiber

EDgun Leshiy 2 Air tank - 350CC / 300 bar carbon fiber

1. Degas gun - locate the bleed screw on the right side of the valve assembly
   •  only crack the bleed; there is a detent ball under the grub screw
   • after 100% of the air is drained, tighten the screw - do not over tighten
2.  Remove auxiliary air tank arm brace - 4mm hex wrench
3. place fill probe into the fill port - this keeps the fill assembly from spinning
4.  Unscrew the auxiliary air tube
5. Unscrew air tube coupling - find the flat spots of the coupling and use a wrench
6.  ensure there is an O-ring at the bottom of the male M18 threads (18X2.5 buna 70)
7. Thread on the new bottle hand tight
8. Fill Leshiy 2 -check for leaks